One more kiss valve question

buggeriamold · 17th June 2005, 07:25

Does any one happen to know what the thread on the swagelok fittings that go into the second gen stainless valve are (or the swagelok part number). I am guessing 1/16 npt, but not realy sure and would prefer not to order the wrong tap.

Thanks
Mark

decoweenie · 17th June 2005, 07:45

Quote: (Originally Posted by buggeriamold)

I am guessing 1/16 npt, but not realy sure and would prefer not to order the wrong tap.

IIRC, it is 1/8" NPT but you better check with Jetsam.

buggeriamold · 17th June 2005, 08:12

Quote:

IIRC, it is 1/8" NPT but you better check with Jetsam.

Thanks,

That is what i thought to start with but 1/8 NPT is too big.

Mark

17th June 2005, 07:25	#1 (permalink)
buggeriamold Custom Title Allowed! Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Feb 2005 Location: australia Posts: 100	One more kiss valve question Does any one happen to know what the thread on the swagelok fittings that go into the second gen stainless valve are (or the swagelok part number). I am guessing 1/16 npt, but not realy sure and would prefer not to order the wrong tap. Thanks Mark __________________ Well, it is cheap stuff and it comes almost from the local gardening store, but it works fine and it's very solid. We tried to destroy one by hitting it with a hammer... we succeeded but we really had to hit it hard.
(Offline)

17th June 2005, 07:45	#2 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Quote: (Originally Posted by buggeriamold) I am guessing 1/16 npt, but not realy sure and would prefer not to order the wrong tap. IIRC, it is 1/8" NPT but you better check with Jetsam.
(Offline)

17th June 2005, 08:12	#3 (permalink)
buggeriamold Custom Title Allowed! Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Feb 2005 Location: australia Posts: 100	Quote: IIRC, it is 1/8" NPT but you better check with Jetsam. Thanks, That is what i thought to start with but 1/8 NPT is too big. Mark __________________ Well, it is cheap stuff and it comes almost from the local gardening store, but it works fine and it's very solid. We tried to destroy one by hitting it with a hammer... we succeeded but we really had to hit it hard.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode