Introduction

andrewb · 10th May 2006, 12:22

My name is andrew, been diving 12 years just got an inpiration classic. Any advise/guidence would be much appreciated.

paronix · 10th May 2006, 12:46

Hi Andrew,
I'm new as well!

***schford*** · 10th May 2006, 12:53

Welcome :-)

Would suggest having a good trawl in the library then asking what eve ryou want!

Stuart

**rigdiver** · 10th May 2006, 13:14

Quote: (Originally Posted by andrewb)

My name is andrew, been diving 12 years just got an inpiration classic. Any advise/guidence would be much appreciated.

Welcome. This is a friendly place with all kinds of knowledge. Ask ?'s and you will get the answer.
Stay wet;
Bill

megdiver12 · 10th May 2006, 13:53

welcome have fun and dive

rewrites · 10th May 2006, 17:52

Hi

you'll find an answer to pretty much any question you might have on here, so have fun looking.

In no particular order, the following might be good starting points:

-buoyancy control/weighting/trim (you'll be surprised just how much weight you can lose with practice, and how much easier the unit is to dive with correct trim)

-unit maintenance (best ways to pack scrubber/store partially used scrubber canister/calibrate head o2/silicon grease 'lubing' points/sterilising loop/etc., etc.)

-consumables (best prices/sources for batteries/sofnolime/02 compatible grease/o-rings/disinfectant etc.)

-drills (build-up that 'muscle memory'! Learn your standard drills to the point you're dreaming about them

- then learn them some more!! - search for extra drills not listed in the AP manual).

-bail-out procedures

Hope this helps.

Have fun

PH

10th May 2006, 12:22	#1 (permalink)
andrewb New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: May 2006 Location: Gloucester Posts: 2	Introduction My name is andrew, been diving 12 years just got an inpiration classic. Any advise/guidence would be much appreciated. Last edited by andrewb : 10th May 2006 at 12:23. Reason: spelling
(Offline)

10th May 2006, 12:46	#2 (permalink)
paronix Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Evolution Join Date: Apr 2006 Location: UK Posts: 106	Re: Introduction Hi Andrew, I'm new as well!
(Offline)

10th May 2006, 12:53	#3 (permalink)
*schford* Despotic Overlord Current Rebreather/s: Megalodon Sport Kiss Other Rebreather/s: Join Date: Jan 2005 Location: London, UK Posts: 3,662	Re: Introduction Welcome :-) Would suggest having a good trawl in the library then asking what eve ryou want! Stuart __________________ Bailout and Kit Management account for Murphy's Law The only bad question is one you did not ask and later wish you had. Use of Rebreather World is subject to the Rebreather World Terms & Conditions of Use
(Offline)

10th May 2006, 13:14	#4 (permalink)
rigdiver LEARNING CONTINUALLY Current Rebreather/s: Inspiration Classic Other Rebreather/s: Megalodon Join Date: Mar 2005 Location: TEXAS Posts: 412	Re: Introduction Quote: (Originally Posted by andrewb) My name is andrew, been diving 12 years just got an inpiration classic. Any advise/guidence would be much appreciated. Welcome. This is a friendly place with all kinds of knowledge. Ask ?'s and you will get the answer. Stay wet; Bill
(Offline)

10th May 2006, 13:53	#5 (permalink)
megdiver12 New Member Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Inspiration Vision Evolution Classic Kiss Join Date: Oct 2005 Location: minnesota Posts: 71	Re: Introduction welcome have fun and dive
(Offline)

10th May 2006, 17:52	#6 (permalink)
rewrites New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Inspiration Vision Evolution Join Date: Sep 2005 Location: Cornwall, UK Posts: 59	Re: Introduction Hi you'll find an answer to pretty much any question you might have on here, so have fun looking. In no particular order, the following might be good starting points: -buoyancy control/weighting/trim (you'll be surprised just how much weight you can lose with practice, and how much easier the unit is to dive with correct trim) -unit maintenance (best ways to pack scrubber/store partially used scrubber canister/calibrate head o2/silicon grease 'lubing' points/sterilising loop/etc., etc.) -consumables (best prices/sources for batteries/sofnolime/02 compatible grease/o-rings/disinfectant etc.) -drills (build-up that 'muscle memory'! Learn your standard drills to the point you're dreaming about them - then learn them some more!! - search for extra drills not listed in the AP manual). -bail-out procedures Hope this helps. Have fun PH
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode