Hello. Who has LAR Parts?

cyphercube · 25th March 2007, 03:05

Hello, I am cyphercube.

I want to convert some of my older LAR V to Mk25, Does any one have, or know where i can get, the parts? I can get the cylinders, but I need the CGA fitting that goes on the pressure reducer.
I know someone makes them, because one of mine already has this conversion on it.

Thanks,
Cyphercube.

Skipbreather · 25th March 2007, 06:52

Quote: (Originally Posted by cyphercube)

Hello, I am cyphercube.

I want to convert some of my older LAR V to Mk25, Does any one have, or know where i can get, the parts? I can get the cylinders, but I need the CGA fitting that goes on the pressure reducer.
I know someone makes them, because one of mine already has this conversion on it.

Thanks,
Cyphercube.

Frank! Welcome!

‘Bout time you got yer sorry backside onto the board! Thought about you when free diving crap vis on Kawai a couple of days ago. You still ‘inspectin’ shoes & sandwich bags @ PSP or are you back at KOA?

You will find this site a fantastic resource for your 'mad scientist' needs.

Oh: as to your question- try a BRASS CGA660 fitting.

“Deathwish” east forever!

Very best,
Ken

cyphercube · 25th March 2007, 21:31

Ken:

I saw your radial for the Meg. Impressive. I get the perforated metal in .045, but use no screen. Its about 165 plus shipping for a 2 foot by 10 foot. I have built a radial for the 240, but never got around to diving it. Not as elegant as yours, but much easier to do. Also leaves a nice well for sensors.
Anyway, I am working for CEROS again, I think you were briefed on the REAPER CHEATER, the non-electronic PO2 controlller? that's the project.
Hope to be doing the ocean work this summer, maybe Cozumel. Wanna be a test pilot (again?)
On the LAR's: I don't want to go 660, that's almost what they have now. I want to go to the newer standard, which is the 540. That way, I can use modern, DOT certified tanks with american valves (that have OP devices)
I think they use the same cylinders as your BMR, don't they? something like 5d by 10 long?If you need some spares, I may be getting a bunch.

bad_karma · 16th June 2007, 07:23

So, who has LAR parts?

25th March 2007, 03:05	#1 (permalink)
cyphercube New Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Mar 2007 Location: desert Posts: 3	Hello. Who has LAR Parts? Hello, I am cyphercube. I want to convert some of my older LAR V to Mk25, Does any one have, or know where i can get, the parts? I can get the cylinders, but I need the CGA fitting that goes on the pressure reducer. I know someone makes them, because one of mine already has this conversion on it. Thanks, Cyphercube.
(Offline)

25th March 2007, 06:52	#2 (permalink)
Skipbreather WAY past the barber pole Current Rebreather/s: Megalodon Home Build Other Rebreather/s: Not Bought Yet MK 15.X Home Build Join Date: Mar 2005 Location: Chicago, Illinois, USA Posts: 528	Re: Hello. Who has LAR Parts? Quote: (Originally Posted by cyphercube) Hello, I am cyphercube. I want to convert some of my older LAR V to Mk25, Does any one have, or know where i can get, the parts? I can get the cylinders, but I need the CGA fitting that goes on the pressure reducer. I know someone makes them, because one of mine already has this conversion on it. Thanks, Cyphercube. Frank! Welcome! ‘Bout time you got yer sorry backside onto the board! Thought about you when free diving crap vis on Kawai a couple of days ago. You still ‘inspectin’ shoes & sandwich bags @ PSP or are you back at KOA? You will find this site a fantastic resource for your 'mad scientist' needs. Oh: as to your question- try a BRASS CGA660 fitting. “Deathwish” east forever! Very best, Ken __________________ "Entropy RULES! Enjoy the interim."
(Offline)

25th March 2007, 21:31	#3 (permalink)
cyphercube New Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Mar 2007 Location: desert Posts: 3	Re: Hello. Who has LAR Parts? Ken: I saw your radial for the Meg. Impressive. I get the perforated metal in .045, but use no screen. Its about 165 plus shipping for a 2 foot by 10 foot. I have built a radial for the 240, but never got around to diving it. Not as elegant as yours, but much easier to do. Also leaves a nice well for sensors. Anyway, I am working for CEROS again, I think you were briefed on the REAPER CHEATER, the non-electronic PO2 controlller? that's the project. Hope to be doing the ocean work this summer, maybe Cozumel. Wanna be a test pilot (again?) On the LAR's: I don't want to go 660, that's almost what they have now. I want to go to the newer standard, which is the 540. That way, I can use modern, DOT certified tanks with american valves (that have OP devices) I think they use the same cylinders as your BMR, don't they? something like 5d by 10 long?If you need some spares, I may be getting a bunch.
(Offline)

16th June 2007, 07:23	#4 (permalink)
bad_karma New Member Current Rebreather/s: Dolphin Other Rebreather/s: Dolphin Join Date: Dec 2006 Posts: 35	Re: Hello. Who has LAR Parts? So, who has LAR parts?
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode