Building the Kent Tooling Box!!!!

KevDD · 20th October 2006, 13:49

Does anyone have a few pic's of them building up their box and attaching stuff like the manifold? I'm finding the instructions a little hard to follow.(I did get it together but have the scrubber bas the wrong way up (doh!!) but could do with a few pics of actually putting the ccr in the box).

***Louby Lou*** · 20th October 2006, 13:53

Quote: (Originally Posted by KevDD)

Does anyone have a few pic's of them building up their box and attaching stuff like the manifold? I'm finding the instructions a little hard to follow.(I did get it together but have the scrubber bas the wrong way up (doh!!) but could do with a few pics of actually putting the ccr in the box).

I've just last night received an article from jkaterenchuk on building up of the KT frame, which I shall be uploading later on this evening into the RBW library, if you can wait till then

Juz · 20th October 2006, 13:54

Hi,

I'd give John a call, he's a great guy and I'm sure will happily talk you through it. I suspect he'd have pics too.

+44 (0) 1227-700015

Juz

KevDD · 20th October 2006, 15:50

Quote: (Originally Posted by Louby Lou)

I've just last night received an article from jkaterenchuk on building up of the KT frame, which I shall be uploading later on this evening into the RBW library, if you can wait till then

This may indeed prove helpful!

N.Bassily · 20th October 2006, 16:00

hi all

i will finish mounting it this evening with Custom divers (VBS wings and the sport harness)
so far it looks good i will be posting some photos by tomorrow

regards

KevDD · 23rd October 2006, 10:11

Hi guys,

I had a poke around but didn't see the article anywhere. Has it been posted yet?

I might try to retakle my box tonight.

***Louby Lou*** · 23rd October 2006, 14:22

Quote: (Originally Posted by KevDD)

Hi guys,

I had a poke around but didn't see the article anywhere. Has it been posted yet?

I might try to retakle my box tonight.

Hi sorry major PC failure over weekend only just finished sorting the damm thing out this morning before work. Back up and running, so will sort tonight.

Sorry for the delay

N.Bassily · 23rd October 2006, 15:33

hi all

as i promised please find the photos for the installation of the KT frame to the Custom diver VBS wings and the sport harness
the frame fit perfectly to it , well done john Excellent workmanship

1-

2-

3-

4-

5-

6-

7-

8-

9-

10-

11-

12-

13-

14-

15-

16-

17-

18-

hope that this will be of a help to you

regards

***Louby Lou*** · 24th October 2006, 09:21

Hia...

Many apologies for the delay, been hectic with work and PC problems, but the article is now all loaded up into the library and can be found HERE

Many thanks to John Katerenchuk aka Jkaterenchuk for a comprehensive buildup and photos of the Kent Tooling Frame

Any questions or comments please go ahead and ask John here; if you would like to leave reputation for John please use the control panel on the article page.

Many thanks for your patience and sorry for the delay

Cheers

Miss Lou
RBW Admin

southerner · 15th March 2007, 18:16

Has anybody used the lift handle with the Kent tooling travel frame, I'm wondering whether to route the hoses over it or through it. Over it and they get crushed when sitting on the boat due to the weight of the lungs pulling them down onto the bar. Through it and they potentially get crushed under the top of the bar when I put the unit on since they want to sit more upright than the lift bar allows (although I've only noticed this by donning the unit and looking in the bathroom mirror, asking my dive buddy to comment on the unit set up during a dive would be a less than useful endeavour). I've dived okay with them through the lift bar, so the crush can't be that serious, and dived with them oka routed over it, so it probably doesn't make any difference. I was wondering what anyone else with the lift handle and the travel frame does?

20th October 2006, 13:49	#1 (permalink)
KevDD Custom Title Allowed! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Oct 2005 Location: Dublin, Ireland Posts: 99	Building the Kent Tooling Box!!!! Does anyone have a few pic's of them building up their box and attaching stuff like the manifold? I'm finding the instructions a little hard to follow.(I did get it together but have the scrubber bas the wrong way up (doh!!) but could do with a few pics of actually putting the ccr in the box).
(Offline)

20th October 2006, 13:53	#2 (permalink)
*Louby Lou* XLVI WC! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Roman Corinium! Posts: 1,040	Re: Building the Kent Tooling Box!!!! Quote: (Originally Posted by KevDD) Does anyone have a few pic's of them building up their box and attaching stuff like the manifold? I'm finding the instructions a little hard to follow.(I did get it together but have the scrubber bas the wrong way up (doh!!) but could do with a few pics of actually putting the ccr in the box). I've just last night received an article from jkaterenchuk on building up of the KT frame, which I shall be uploading later on this evening into the RBW library, if you can wait till then __________________ Miss Lou x Use of RBW is subject to the Rebreatherworld Terms and Conditions - Please read! Outlaw Divers - Sssh we're diving! You heff vays uff dealink vis zem, oh Miss RBW Admin! - Rob Davie Feb 06
(Offline)

20th October 2006, 13:54	#3 (permalink)
Juz Team Kinky Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: London UK Posts: 147	Re: Building the Kent Tooling Box!!!! Hi, I'd give John a call, he's a great guy and I'm sure will happily talk you through it. I suspect he'd have pics too. +44 (0) 1227-700015 Juz __________________ ~KINKY DIVERS~ Because going down is fun We are all prompted by the same motives, all deceived by the same fallacies, all animated by hope, obstructed by danger, entangled by desire and seduced by pleasure. Welcome to Kinky Divers!
(Offline)

20th October 2006, 15:50	#4 (permalink)
KevDD Custom Title Allowed! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Oct 2005 Location: Dublin, Ireland Posts: 99	Re: Building the Kent Tooling Box!!!! Quote: (Originally Posted by Louby Lou) I've just last night received an article from jkaterenchuk on building up of the KT frame, which I shall be uploading later on this evening into the RBW library, if you can wait till then This may indeed prove helpful!
(Offline)

20th October 2006, 16:00	#5 (permalink)
N.Bassily New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Sep 2005 Location: Malta Posts: 22	Re: Building the Kent Tooling Box!!!! hi all i will finish mounting it this evening with Custom divers (VBS wings and the sport harness) so far it looks good i will be posting some photos by tomorrow regards __________________ Nader Bassily If It Is There Find ItIf it is on the way Move it But If It is under water leave it to me
(Offline)

23rd October 2006, 10:11	#6 (permalink)
KevDD Custom Title Allowed! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Oct 2005 Location: Dublin, Ireland Posts: 99	Re: Building the Kent Tooling Box!!!! Hi guys, I had a poke around but didn't see the article anywhere. Has it been posted yet? I might try to retakle my box tonight.
(Offline)

23rd October 2006, 14:22	#7 (permalink)
*Louby Lou* XLVI WC! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Roman Corinium! Posts: 1,040	Re: Building the Kent Tooling Box!!!! Quote: (Originally Posted by KevDD) Hi guys, I had a poke around but didn't see the article anywhere. Has it been posted yet? I might try to retakle my box tonight. Hi sorry major PC failure over weekend only just finished sorting the damm thing out this morning before work. Back up and running, so will sort tonight. Sorry for the delay __________________ Miss Lou x Use of RBW is subject to the Rebreatherworld Terms and Conditions - Please read! Outlaw Divers - Sssh we're diving! You heff vays uff dealink vis zem, oh Miss RBW Admin! - Rob Davie Feb 06
(Offline)

23rd October 2006, 15:33	#8 (permalink)
N.Bassily New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Sep 2005 Location: Malta Posts: 22	Re: Building the Kent Tooling Box!!!! hi all as i promised please find the photos for the installation of the KT frame to the Custom diver VBS wings and the sport harness the frame fit perfectly to it , well done john Excellent workmanship 1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- 16- 17- 18- hope that this will be of a help to you regards __________________ Nader Bassily If It Is There Find ItIf it is on the way Move it But If It is under water leave it to me Last edited by N.Bassily : 25th October 2006 at 09:18.
(Offline)

24th October 2006, 09:21	#9 (permalink)
*Louby Lou* XLVI WC! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Roman Corinium! Posts: 1,040	Re: Building the Kent Tooling Box!!!! Hia... Many apologies for the delay, been hectic with work and PC problems, but the article is now all loaded up into the library and can be found HERE Many thanks to John Katerenchuk aka Jkaterenchuk for a comprehensive buildup and photos of the Kent Tooling Frame Any questions or comments please go ahead and ask John here; if you would like to leave reputation for John please use the control panel on the article page. Many thanks for your patience and sorry for the delay Cheers Miss Lou RBW Admin __________________ Miss Lou x Use of RBW is subject to the Rebreatherworld Terms and Conditions - Please read! Outlaw Divers - Sssh we're diving! You heff vays uff dealink vis zem, oh Miss RBW Admin! - Rob Davie Feb 06
(Offline)

15th March 2007, 18:16	#10 (permalink)
southerner New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Nov 2006 Location: Barking Posts: 3	Re: Building the Kent Tooling Box!!!! Has anybody used the lift handle with the Kent tooling travel frame, I'm wondering whether to route the hoses over it or through it. Over it and they get crushed when sitting on the boat due to the weight of the lungs pulling them down onto the bar. Through it and they potentially get crushed under the top of the bar when I put the unit on since they want to sit more upright than the lift bar allows (although I've only noticed this by donning the unit and looking in the bathroom mirror, asking my dive buddy to comment on the unit set up during a dive would be a less than useful endeavour). I've dived okay with them through the lift bar, so the crush can't be that serious, and dived with them oka routed over it, so it probably doesn't make any difference. I was wondering what anyone else with the lift handle and the travel frame does?
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode