O2 warning on Slave

Simon Ciantar · 9th October 2006, 22:07

Hi Guys,

Last weekend during deco in 6 mtrs whilst pushing my cells to 1.6 as a routine check - my slave began to show the high O2 warning but the master did not , only when I pushed slightly higer set point did the master kick off and the audible alarm go off, any suggestions why ,and if this normal ?

thks

Simon

divelermentov · 10th October 2006, 01:20

Quote: (Originally Posted by Simon Ciantar)

Hi Guys,

Last weekend during deco in 6 mtrs whilst pushing my cells to 1.6 as a routine check - my slave began to show the high O2 warning but the master did not , only when I pushed slightly higer set point did the master kick off and the audible alarm go off, any suggestions why ,and if this normal ?

thks

Simon

Hi Simon

1.6 will trigger the high O2 alarm on the inspo - if I read your post correctly the slave did show 1.6 and gave the alarm - which is correct,
but what was the Master reading ? If it did read 1.6 on all cells as well I would expcet it to go to high O2, but if it did read other than the slave I would be somehoe supiscious ( hence teh slave gets the data form the mastrer calibration - or so I think?).

If it did read different I would conatct AP with this problem, maybe a software bug ?

Cheers
christian

Simon Ciantar · 11th October 2006, 20:19

Hi

Both the slave and the master were giving the same readings. But the slave was giving a high o2 warning [but obviously wihtout the audible alarm] whilst the master was not showing any alarms . If anything I would have expexted the Master to go off first

anyone has had this prob

Simon

9th October 2006, 22:07	#1 (permalink)
Simon Ciantar New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: May 2005 Location: Malta Posts: 38	O2 warning on Slave Hi Guys, Last weekend during deco in 6 mtrs whilst pushing my cells to 1.6 as a routine check - my slave began to show the high O2 warning but the master did not , only when I pushed slightly higer set point did the master kick off and the audible alarm go off, any suggestions why ,and if this normal ? thks Simon
(Offline)

10th October 2006, 01:20	#2 (permalink)
divelermentov Nutty dentist - uwdriller Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Home Build Join Date: May 2006 Location: Auckland Posts: 665	Re: O2 warning on Slave Quote: (Originally Posted by Simon Ciantar) Hi Guys, Last weekend during deco in 6 mtrs whilst pushing my cells to 1.6 as a routine check - my slave began to show the high O2 warning but the master did not , only when I pushed slightly higer set point did the master kick off and the audible alarm go off, any suggestions why ,and if this normal ? thks Simon Hi Simon 1.6 will trigger the high O2 alarm on the inspo - if I read your post correctly the slave did show 1.6 and gave the alarm - which is correct, but what was the Master reading ? If it did read 1.6 on all cells as well I would expcet it to go to high O2, but if it did read other than the slave I would be somehoe supiscious ( hence teh slave gets the data form the mastrer calibration - or so I think?). If it did read different I would conatct AP with this problem, maybe a software bug ? Cheers christian __________________ May The Sorb Be With You
(Offline)

11th October 2006, 20:19	#3 (permalink)
Simon Ciantar New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: May 2005 Location: Malta Posts: 38	Re: O2 warning on Slave Hi Both the slave and the master were giving the same readings. But the slave was giving a high o2 warning [but obviously wihtout the audible alarm] whilst the master was not showing any alarms . If anything I would have expexted the Master to go off first anyone has had this prob Simon
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode