strange slave handset

urho · 21st August 2006, 10:40

Hello,

On last dive during deco just before ascending to surface I looked my both hand sets. Master showed as I expected 1.20 1.20 1.20 but slave was something like 1.10 1.15 etc.

I made a dil flush and checked again but same situation. Both reacted normally when breathing. I switched slave off and again on. After that also slave was 1.20 1.20 1.20.

--
Harri

Pierre Farrugia · 21st August 2006, 12:34

Quote: (Originally Posted by urho)

Hello,

On last dive during deco just before ascending to surface I looked my both hand sets. Master showed as I expected 1.20 1.20 1.20 but slave was something like 1.10 1.15 etc.

I made a dil flush and checked again but same situation. Both reacted normally when breathing. I switched slave off and again on. After that also slave was 1.20 1.20 1.20.

--
Harri

Have you switched on Slave before Master finished calibration ? Because if no, if I am not mistaken slave will get different reading.

urho · 21st August 2006, 12:58

Quote: (Originally Posted by Pierre Farrugia)

Have you switched on Slave before Master finished calibration ? Because if no, if I am not mistaken slave will get different reading.

Yes, I switched on slave just after the master.

And slave was correct whole dive, the error appeared just before I started ascent to surface.

--
Harri

21st August 2006, 10:40	#1 (permalink)
urho New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Sep 2005 Location: Finland Posts: 34	strange slave handset Hello, On last dive during deco just before ascending to surface I looked my both hand sets. Master showed as I expected 1.20 1.20 1.20 but slave was something like 1.10 1.15 etc. I made a dil flush and checked again but same situation. Both reacted normally when breathing. I switched slave off and again on. After that also slave was 1.20 1.20 1.20. -- Harri
(Offline)

21st August 2006, 12:34	#2 (permalink)
Pierre Farrugia Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: Malta Posts: 636	Re: strange slave handset Quote: (Originally Posted by urho) Hello, On last dive during deco just before ascending to surface I looked my both hand sets. Master showed as I expected 1.20 1.20 1.20 but slave was something like 1.10 1.15 etc. I made a dil flush and checked again but same situation. Both reacted normally when breathing. I switched slave off and again on. After that also slave was 1.20 1.20 1.20. -- Harri Have you switched on Slave before Master finished calibration ? Because if no, if I am not mistaken slave will get different reading. __________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" www.atlam.org www.divemed.com
(Offline)

21st August 2006, 12:58	#3 (permalink)
urho New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Sep 2005 Location: Finland Posts: 34	Re: strange slave handset Quote: (Originally Posted by Pierre Farrugia) Have you switched on Slave before Master finished calibration ? Because if no, if I am not mistaken slave will get different reading. Yes, I switched on slave just after the master. And slave was correct whole dive, the error appeared just before I started ascent to surface. -- Harri
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode