YBOD maintenance

Pierre Farrugia · 10th May 2005, 07:33

Hello all,

Is there a schedule for YBOD maint. ? When you should change certaine O rings and cleaning and greasing apart from washing and cleaning/disinfecting after each use?

Doorduijn, Niels · 15th May 2005, 10:48

Pierre,

The Inspiration manual has a section on this.

Personally, I service my Inspiration annually, although the handsets is something which I will probably end up doing once per two years. Servicing the unit - other than the handsets - is really not that difficult. Just carefully reclean the unit, replace the orings and replace the O2 sensors.

The main exception is the mouth piece, which I tend to open up every six months or so or more often to clear and lubricate it.

Rgs,

Niels Doorduijn

10th May 2005, 07:33	#1 (permalink)
Pierre Farrugia Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: Malta Posts: 636	YBOD maintenance Hello all, Is there a schedule for YBOD maint. ? When you should change certaine O rings and cleaning and greasing apart from washing and cleaning/disinfecting after each use? __________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" www.atlam.org www.divemed.com
(Offline)

15th May 2005, 10:48	#2 (permalink)
Doorduijn, Niels Custom Title Allowed! Current Rebreather/s: Inspiration Classic MK 15.X Dolphin Other Rebreather/s: Dolphin Join Date: May 2005 Location: Netherlands Posts: 53	Pierre, The Inspiration manual has a section on this. Personally, I service my Inspiration annually, although the handsets is something which I will probably end up doing once per two years. Servicing the unit - other than the handsets - is really not that difficult. Just carefully reclean the unit, replace the orings and replace the O2 sensors. The main exception is the mouth piece, which I tend to open up every six months or so or more often to clear and lubricate it. Rgs, Niels Doorduijn
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode