HAMMERHEAD 'revision B - version 5.4'

paulraymaekers · 17th May 2006, 11:33

Quote: (Originally Posted by PCDiver)

Correctemundo -

There are actually two, one on the primary AND one on the secondary

hello, eeuuhh, why a pressure transducer in the secondary?? I thought it was only PPO2 gauge with HUD??

regards
paul

***jradomski*** · 17th May 2006, 11:36

Quote: (Originally Posted by paulraymaekers)

hello, eeuuhh, why a pressure transducer in the secondary?? I thought it was only PPO2 gauge with HUD??

regards
paul

the new version secondaries, have a depth guage and timer for backup purposes.. no deco computer though..

PCDiver · 17th May 2006, 12:35

Quote: (Originally Posted by jradomski)

the new version secondaries, have a depth guage and timer for backup purposes.. no deco computer though..

Now that would be great. A backup integrated deco computer.

Mark Chase · 17th May 2006, 12:56

Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up??

Many thanks

Mark Chase

***jradomski*** · 17th May 2006, 13:00

Quote: (Originally Posted by Mark Chase)

Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up??

Many thanks

Mark Chase

Thats a 1/4 npt port.. Kevin sells premade cables (I think 2 pin only)

You can eaily make your own just make sure the fitting for the head is a 1/4 npt and you are all set..

diverklondike · 17th May 2006, 13:02

Quote: (Originally Posted by Mark Chase)

Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up??

Many thanks

Mark Chase

Mark,

Kevin J. can provide either a 2pin or 7pin cable with the appropreate fittings to allow the connection.... You simply remove the plug and replace it with the cable fitting...

Dive Safe...

Mark

Mark Chase · 17th May 2006, 13:32

Quote: (Originally Posted by diverklondike)

Mark,

Kevin J. can provide either a 2pin or 7pin cable with the appropreate fittings to allow the connection.... You simply remove the plug and replace it with the cable fitting...

Dive Safe...

Mark

Thats great, thanks.

ATB

Mark Chase

heyydude · 17th May 2006, 14:48

We have both the 2 Pin and 7 Pin in stock. You just take out the 1/4 NPT bung, and then screw in the new cable. Voila! Plug the Molex into your 4th Cell located in the O2 Sensor Plate, and you're ready to go.

Contact Doug <doug@rebreather.us> if you want to place an order.

All the best,

Kevin Juergensen
Juergensen Marine.

Mark Chase · 17th May 2006, 15:11

Quote: (Originally Posted by heyydude)

We have both the 2 Pin and 7 Pin in stock. You just take out the 1/4 NPT bung, and then screw in the new cable. Voila! Plug the Molex into your 4th Cell located in the O2 Sensor Plate, and you're ready to go.

Contact Doug <doug@rebreather.us> if you want to place an order.

All the best,

Kevin Juergensen
Juergensen Marine.

Thanks Kevin, Email sent

17th May 2006, 11:33	#11 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,643	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by PCDiver) Correctemundo - There are actually two, one on the primary AND one on the secondary hello, eeuuhh, why a pressure transducer in the secondary?? I thought it was only PPO2 gauge with HUD?? regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

17th May 2006, 11:36	#12 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,115	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by paulraymaekers) hello, eeuuhh, why a pressure transducer in the secondary?? I thought it was only PPO2 gauge with HUD?? regards paul the new version secondaries, have a depth guage and timer for backup purposes.. no deco computer though.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)

17th May 2006, 12:35	#13 (permalink)
PCDiver Submerge Productions Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Belgium Posts: 1,003	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by jradomski) the new version secondaries, have a depth guage and timer for backup purposes.. no deco computer though.. Now that would be great. A backup integrated deco computer.
(Offline)

17th May 2006, 12:56	#14 (permalink)
Mark Chase RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,868	Re: HAMMERHEAD 'revision B - version 5.4' Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up?? Many thanks Mark Chase __________________ See my "Doing It Chasey" video where I'm locked into a padded room, naked, with two ball bearings and within an Hour, I manage to lose one and break the other!!! Kevin Juergensen 16/11/08 [/quote]
(Offline)

17th May 2006, 13:00	#15 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,115	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by Mark Chase) Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up?? Many thanks Mark Chase Thats a 1/4 npt port.. Kevin sells premade cables (I think 2 pin only) You can eaily make your own just make sure the fitting for the head is a 1/4 npt and you are all set.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)

17th May 2006, 13:02	#16 (permalink)
diverklondike RBW Member Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Inspiration Classic Other CCR Join Date: Oct 2005 Location: Delaware, USA Posts: 1,714	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by Mark Chase) Any body have any picks or info on how to intigrate my VR3 on to a fourth cell? I have a hole in the head (with a grub screw in it) so is it a special cable or can i make one up?? Many thanks Mark Chase Mark, Kevin J. can provide either a 2pin or 7pin cable with the appropreate fittings to allow the connection.... You simply remove the plug and replace it with the cable fitting... Dive Safe... Mark
(Offline)

17th May 2006, 13:32	#17 (permalink)
Mark Chase RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,868	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by diverklondike) Mark, Kevin J. can provide either a 2pin or 7pin cable with the appropreate fittings to allow the connection.... You simply remove the plug and replace it with the cable fitting... Dive Safe... Mark Thats great, thanks. ATB Mark Chase __________________ See my "Doing It Chasey" video where I'm locked into a padded room, naked, with two ball bearings and within an Hour, I manage to lose one and break the other!!! Kevin Juergensen 16/11/08 [/quote]
(Offline)

17th May 2006, 14:48	#18 (permalink)
heyydude King of the Geeks Current Rebreather/s: MK 15.X Optima Other CCR Other Rebreather/s: Other CCR Join Date: May 2005 Location: Addison, Pennsylvania Posts: 381	Re: HAMMERHEAD 'revision B - version 5.4' We have both the 2 Pin and 7 Pin in stock. You just take out the 1/4 NPT bung, and then screw in the new cable. Voila! Plug the Molex into your 4th Cell located in the O2 Sensor Plate, and you're ready to go. Contact Doug <doug@rebreather.us> if you want to place an order. All the best, Kevin Juergensen Juergensen Marine.
(Offline)

17th May 2006, 15:11	#19 (permalink)
Mark Chase RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,868	Re: HAMMERHEAD 'revision B - version 5.4' Quote: (Originally Posted by heyydude) We have both the 2 Pin and 7 Pin in stock. You just take out the 1/4 NPT bung, and then screw in the new cable. Voila! Plug the Molex into your 4th Cell located in the O2 Sensor Plate, and you're ready to go. Contact Doug <doug@rebreather.us> if you want to place an order. All the best, Kevin Juergensen Juergensen Marine. Thanks Kevin, Email sent __________________ See my "Doing It Chasey" video where I'm locked into a padded room, naked, with two ball bearings and within an Hour, I manage to lose one and break the other!!! Kevin Juergensen 16/11/08 [/quote]
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode