Strange behaviour of my Inspiration

blue_dubai

Hi,

i did so far altogether 10 hours on my vision. Last Friday we were diving @ 20m. and i got a high PO2 warning from my 2nd cell. The cell reading was always (on that dive 0.2 higher than cell 1 & 2).
I flushed the unit @ 20m. to verify the correct reading of the cell 1 and 2.
They were perfectly normal.
Anyway i decided to call the dive and acended.
For the second dive i had no problems at all. All 3 cells were working and reading perfectly.
It was a bit strange to me and i assume that maybe some moisture was on the second cell.
I am still very new to silent diving and would appreciate the feedback of the more experienced divers very much! (I dont want to hijack this tread and if required i will move my comment to a new one).

__________________
Best Regards,

Saman

leakybreather

My wife is having the same problem with her brand new vision. Today we dropped from 6m to 15m on low set point ... 3mins later she change from low to high set point 1.3, and got a cell warning on cell 1 - 1.07 .97 and .93, cell 1 went to 1.4 after bailing out, collecting her thoughts she dropped set point back to .7, dil flushed and all was ok, so we carried on with the dive. Later in the the dive she went back on high set point, and this time she got a cell warning on cell 3 - 1.29 1.34 1.47 - dropped back to low set point and carried on, drove the breather back up to 1.2 then got a cell warning 1. 22, 1.32, 1.46, back down to low set point

As you can tell she wasn't happy .. she has the new solenoid, and the new diffuser ... any ideas before she puts on ebay

Humuhumu

Hi,

My problem is still not fixed, I will dive tomorrow and I will again get a high oxygen warning when I will change the setpoint...

I would like to have a fix for that problem !!!!!

I like the Inspiration, it's really a great unit, but I don't want to have this f... high oxygen warning on each dive.

I will keep you all informed...

Cheers

Humuhumu

__________________
Humuhumu Nukunuku Apua'a