Valve problem…

LEE. SUNGOH. · 4th June 2008, 10:54

hi~!
The pressure is strong in my Evolution Diluent Cylinder Valve.
Disjoints Valve, the white plastic which does to be being problem appears the stem reverse bow.
Where is bought this and?
Photograph attachment.
Thanks!

tecdivertraining · 4th June 2008, 12:51

You can get them as a spare part from AP direct just email zoe she will be able to post you one.

aborigene · 4th June 2008, 22:12

Quote: (Originally Posted by tecdivertraining)

You can get them as a spare part from AP direct just email zoe she will be able to post you one.

that right I did exactly the same, i ordered AP it cost about 7 Euros

Scubydoo · 5th June 2008, 06:44

Quote: (Originally Posted by LEE. SUNGOH.)

hi~!
The pressure is strong in my Evolution Diluent Cylinder Valve.
Disjoints Valve, the white plastic which does to be being problem appears the stem reverse bow.

Where is bought this and?

Hi Lee, it looks like you someone has really overtightened that valve to get the seat to dig in that much. These are sweet valves and only need light finger pressure to close and open again.Also, there seems to be rust on the seat, so I would get the cylinder internally inspected.contact zoe@apdiving.com or use their on line shop apdiving.com Clive

4th June 2008, 12:51	#2 (permalink)
tecdivertraining RebreatherWorld Sponsor Current Rebreather/s: Inspiration Classic Inspiration Vision Evolution Megalodon Ouroboros Dolphin Other Rebreather/s: Not Bought Yet Dolphin Join Date: May 2005 Location: Phuket, Thailand Posts: 462	Re: Valve problem… You can get them as a spare part from AP direct just email zoe she will be able to post you one. __________________ Mathew Partridge Technical Director Pro-Tech Dive College www.protechdivers.com www.tech-ccr.com
(Offline)

4th June 2008, 22:12	#3 (permalink)
aborigene New Member Current Rebreather/s: Inspiration Classic Inspiration Vision Other Rebreather/s: Join Date: Jan 2008 Location: Bandol (south of France) Posts: 8	Re: Valve problem… Quote: (Originally Posted by tecdivertraining) You can get them as a spare part from AP direct just email zoe she will be able to post you one. that right I did exactly the same, i ordered AP it cost about 7 Euros
(Offline)

5th June 2008, 06:44	#4 (permalink)
Scubydoo New Member Current Rebreather/s: Inspiration Classic Evolution Classic Kiss Other CCR Other Rebreather/s: Other CCR Join Date: Oct 2006 Location: Rugby Posts: 7	Re: Valve problem… Quote: (Originally Posted by LEE. SUNGOH.) hi~! The pressure is strong in my Evolution Diluent Cylinder Valve. Disjoints Valve, the white plastic which does to be being problem appears the stem reverse bow. Where is bought this and? Hi Lee, it looks like you someone has really overtightened that valve to get the seat to dig in that much. These are sweet valves and only need light finger pressure to close and open again.Also, there seems to be rust on the seat, so I would get the cylinder internally inspected.contact zoe@apdiving.com or use their on line shop apdiving.com Clive
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode