Handling bar for Inspiration

Humuhumu · 20th May 2008, 16:53

Hi,

please don't be angry if I ask an old question...

Does anybody know where I can buy such a nice SS handling bar for my Inspiration ?

It should be easy to install and not heavy (as I don't want to make body building with the unit).

Best regards.

Humuhumu

**nigelh** · 20th May 2008, 18:02

Quote: (Originally Posted by Humuhumu)

Does anybody know where I can buy such a nice SS handling bar for my Inspiration ?

I use the Custard Divers one.
It needed thumping a bit to make it line up but it is such a hand magnet when people reach to help you lift the thing it.

broady · 20th May 2008, 18:33

Kent Tooling handle - fitted in 5 minutes easy peasy

HTH

Graham

.

**Fun Under Pressure** · 20th May 2008, 21:57

Have a look here: CCR Inspiration - Buddy Inspiration - Tauchausbildung bei Frank Gottschalch und Andreas Kärgel The handle bar looks nice.

Humuhumu · 21st May 2008, 19:48

Thank you Markku, I will buy it in Germany, Leverkusen is not too far !

Cheers

Humuhumu.

KENT TOOLING · 21st May 2008, 22:47

What ever bar manufacture you chose make shore it fits your Inspo box as AP valves has change the centers of the slots where the fabric handle goes.

John

**yves** · 5th June 2008, 20:30

Quote: (Originally Posted by Humuhumu)

Hi,

please don't be angry if I ask an old question...

Does anybody know where I can buy such a nice SS handling bar for my Inspiration ?

It should be easy to install and not heavy (as I don't want to make body building with the unit).

Best regards.

Humuhumu

Hi
I have a new one from CD still in stock
I can leave it for 70euro; location : Koln, Rondorf
greets

DanG · 12th June 2008, 17:07

Quote: (Originally Posted by yves)

Hi
I have a new one from CD still in stock
I can leave it for 70euro; location : Koln, Rondorf
greets

Hello,

I am interesting in... Is it always in stock ?
Friendly
Daniel

UKSteve · 12th June 2008, 18:28

Quote: (Originally Posted by KENT TOOLING)

What ever bar manufacture you chose make shore it fits your Inspo box as AP valves has change the centers of the slots where the fabric handle goes.

John

...as I found out this morning when trying to fit a CD one.

Easy enough to drill a couple of holes in the case tho...

Slightly dissapointed that Unit it will not quite fit in the box after installation of the bar. Its only a cm or two - pity the handle wasnt made a touch smaller. Will go in with the end of the box distored a bit.

Steve

**PhilSiswick** · 13th June 2008, 10:12

Quote: (Originally Posted by UKSteve)

...as I found out this morning when trying to fit a CD one.

Easy enough to drill a couple of holes in the case tho...

Slightly dissapointed that Unit it will not quite fit in the box after installation of the bar. Its only a cm or two - pity the handle wasnt made a touch smaller. Will go in with the end of the box distored a bit.

Steve

Interesting - mine went in fine with the CD bar. It even had a couple of centimetres of space. OTOH, with the Narked@90 stand, the Evo I now have should be slightly shorter than the Inspo was (I still have the Inspo box), so should fit fine. Does it though - does it b*gger?

Have there been different sizes of box over time? Is there a reverse-Tardis effect in APD boxes?

Cheers,

20th May 2008, 16:53	#1 (permalink)
Humuhumu New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Not Bought Yet Join Date: Jan 2007 Location: Blue Planet Posts: 76	Handling bar for Inspiration Hi, please don't be angry if I ask an old question... Does anybody know where I can buy such a nice SS handling bar for my Inspiration ? It should be easy to install and not heavy (as I don't want to make body building with the unit). Best regards. Humuhumu __________________ Humuhumu Nukunuku Apua'Ha
(Offline)

20th May 2008, 18:02	#2 (permalink)
nigelh New Member Current Rebreather/s: Inspiration Vision Other CCR Other Rebreather/s: Inspiration Classic Other CCR Join Date: Mar 2005 Location: Brighton, Sussex, UK Posts: 784	Re: Handling bar for Inspiration Quote: (Originally Posted by Humuhumu) Does anybody know where I can buy such a nice SS handling bar for my Inspiration ? I use the Custard Divers one. It needed thumping a bit to make it line up but it is such a hand magnet when people reach to help you lift the thing it. __________________ nigelh
(Offline)

20th May 2008, 18:33	#3 (permalink)
broady New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Join Date: Feb 2007 Location: Kent Posts: 22	Re: Handling bar for Inspiration Kent Tooling handle - fitted in 5 minutes easy peasy HTH Graham .
(Online)

20th May 2008, 21:57	#4 (permalink)
Fun Under Pressure Supporting Member Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Join Date: Nov 2006 Location: Germany Posts: 579	Re: Handling bar for Inspiration Have a look here: CCR Inspiration - Buddy Inspiration - Tauchausbildung bei Frank Gottschalch und Andreas Kärgel The handle bar looks nice. __________________ Cheers Markku Meg # 773
(Offline)

21st May 2008, 19:48	#5 (permalink)
Humuhumu New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Not Bought Yet Join Date: Jan 2007 Location: Blue Planet Posts: 76	Re: Handling bar for Inspiration Thank you Markku, I will buy it in Germany, Leverkusen is not too far ! Cheers Humuhumu. __________________ Humuhumu Nukunuku Apua'Ha
(Offline)

21st May 2008, 22:47	#6 (permalink)
KENT TOOLING New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Aug 2005 Location: UK Posts: 49	Re: Handling bar for Inspiration What ever bar manufacture you chose make shore it fits your Inspo box as AP valves has change the centers of the slots where the fabric handle goes. John __________________ John Perrin +44 01227 700015 (Technical Director) KENT TOOLING (Diving Products) www.divingproducts.co.uk Fire & Smoke Damper Manufactures +44 01227 700015 www.tri-prodanpers.co.uk
(Offline)

5th June 2008, 20:30	#7 (permalink)
yves Supporting Member Current Rebreather/s: Inspiration Classic Inspiration Vision Evolution Other CCR Dolphin Azimuth Other Rebreather/s: Other CCR Dolphin Azimuth Join Date: Nov 2005 Location: Germany Posts: 52	Re: Handling bar for Inspiration Quote: (Originally Posted by Humuhumu) Hi, please don't be angry if I ask an old question... Does anybody know where I can buy such a nice SS handling bar for my Inspiration ? It should be easy to install and not heavy (as I don't want to make body building with the unit). Best regards. Humuhumu Hi I have a new one from CD still in stock I can leave it for 70euro; location : Koln, Rondorf greets __________________ Yves Christiaens aquatec@mac.com http://web.mac.com/aquatec
(Offline)

12th June 2008, 17:07	#8 (permalink)
DanG New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Apr 2008 Location: Strasbourg Posts: 7	Re: Handling bar for Inspiration Quote: (Originally Posted by yves) Hi I have a new one from CD still in stock I can leave it for 70euro; location : Koln, Rondorf greets Hello, I am interesting in... Is it always in stock ? Friendly Daniel
(Offline)

12th June 2008, 18:28	#9 (permalink)
UKSteve Still a novice... Current Rebreather/s: Inspiration Vision Other Rebreather/s: Join Date: Jul 2005 Location: Weymouth, UK Posts: 557	Re: Handling bar for Inspiration Quote: (Originally Posted by KENT TOOLING) What ever bar manufacture you chose make shore it fits your Inspo box as AP valves has change the centers of the slots where the fabric handle goes. John ...as I found out this morning when trying to fit a CD one. Easy enough to drill a couple of holes in the case tho... Slightly dissapointed that Unit it will not quite fit in the box after installation of the bar. Its only a cm or two - pity the handle wasnt made a touch smaller. Will go in with the end of the box distored a bit. Steve __________________ +++++++++++++++++++++++++++++++++++++++++ "In this crisis, a number of times people have seen a light at the end of the tunnel and it has ended up being a train coming down the tracks" Brady Dougan, chief executive of Credit Suisse +++++++++++++++++++++++++++++++++++++++++ Last edited by UKSteve : 12th June 2008 at 18:35.
(Offline)

13th June 2008, 10:12	#10 (permalink)
PhilSiswick WSKD 0001 Current Rebreather/s: Evolution Other Rebreather/s: Inspiration Vision Join Date: Apr 2006 Location: Oxford, UK Posts: 880	Re: Handling bar for Inspiration Quote: (Originally Posted by UKSteve) ...as I found out this morning when trying to fit a CD one. Easy enough to drill a couple of holes in the case tho... Slightly dissapointed that Unit it will not quite fit in the box after installation of the bar. Its only a cm or two - pity the handle wasnt made a touch smaller. Will go in with the end of the box distored a bit. Steve Interesting - mine went in fine with the CD bar. It even had a couple of centimetres of space. OTOH, with the Narked@90 stand, the Evo I now have should be slightly shorter than the Inspo was (I still have the Inspo box), so should fit fine. Does it though - does it b*gger? Have there been different sizes of box over time? Is there a reverse-Tardis effect in APD boxes? Cheers, __________________ Phil No comment on open circuit... it's an evolutionary dead end not really worth discussing here. Dave Sutton, 2007 I have always felt that the dive I am on is not nearly important as the dives I plan to be on the rest of my life. Tom Rose, 2007 www.hugsac.org.uk
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode