Unit On Order & Mod 1 Booked

taza

Ordered the unit Inspiration Vision, Mod1 starts 4th April can't wait.So would be gratefull of a list of spares to carry.Plus part number.CheersTaza

bambang

Dear Taza

Vision Inspo is great choice.! Good luck with your training.!

Try bringing cleaning solution for training to wipe that strange "rubbery" taste from new CCR.

Btw, try asking your instructor to spent a lot of time in the shallow doing drills (8-10m) with 1,3 setpoint. With CCR, shallow water proficiency will mean mastering the deep.

regards,


BB

vid

good luck and enjoy

see here for spares
http://www.rebreatherworld.com/inspi...ghlight=spares

and APD site for spares - if you register with AP (which you should) you'll get access to the "full" AP website A.P.Diving Direct and you will be able to buy certain spare parts

HTH vid

__________________
vid

nilmol

Hi,

Here's a suggestion;

Inspiration extras

Automatic Diluent Valve
RB70A ADV Service Kit – O rings, gasket, skid disc, filter

Recommended Start up Consumables
RB30 20 kg container of Sofnolime 1 mm - 2.5 mm
RB31 2 x 4.5 kg containers of Sofnolime: SFNL/4.5 1 mm - 2.5 mm
RB06/01/10 2 x Batteries (CRP2)
RB09A Scrim Kit (CO2 cartridge filters)
EV06A Vision canister O rings, for lid and cartridge
APD10 Oxygen Cell - coaxial swivel connector
RB02B Mouthpiece service kit, (O-rings and non-return valves)
RB12A Set of O rings for convoluted hose fittings
RB05B Diluent Inflator Service kit
RB05B/1 Oxygen Inflator Service kit
Buddy Clean 500ml Buddy Clean

Air Filling Accessories
AP8M Compressor charging adaptor

Accessories
BK31 Verti-clip
EV92 Evolution off-board cylinder bracket.

Maintenance
Rebreather TOOL 3 Box spanner (already included)
Rebreather TOOL 5 Over pressure exhaust valve spanner
Rebreather TOOL 6 T-Piece Spanner
Rebreather TOOL 8 ADV diaphragm locking ring tool
Rebreather TOOL 9 ADV tilt valve boss tool
AP70 Silicon Grease, 50g tube, AIR fittings
AP72 Oxygen Compatible Grease
AP200/10 Direct Feed Stem for use as an ‘air gun’

Cylinders & Valves
AP6H/RB13 Diluent 3L
AP6Hox/RB13A, Oxygen 3L

General Accessories
AP36 Buddy Pocket Reel
APSMBC Self-sealing surface marker buoy, All Red
Book on Inspiration CCR 'Diving without bubbles', English version


The ADV and flow stop extras are ordered on the Insp order form, not here.

You may want to leave some things out to make it cheaper. For me the first thing to leave out would be the cylinders but of course they are really nice to have on trips...

Anyway, it's pretty much what I ordered

/nils
currently waiting for the BOV to show up...

taza

Thanks Nilmo
Just what I needed
Cheers

Campbell

I know that you asked for the spare parts needed, but to give you some advice try the Mark Chase post on his first year:

Here (Hope it works!)

Congrats on your purchase etc. One thing I have done (not sure if I'm suposed to but....) I put some mouthwash (a dribble) in the bottom of the scrubber canister for about 2 min, poor it and allow the bottom to stay wet but not to be a volume of fluid.

The previous owner used to clean the unit with mouthwash - I don't do that!!!

Gives a really good minty breathe. I don't do it everytime but if I have a long dive it's quite nice!

John

__________________