Connector for VR2 4th cell option

TeeJF

I have just got a fourth cell holder for one of our Inspos but the cable to connect it to the VR2 has a two pin connector where it actually needs a 7 pin (or something!)... anyone know an easy and cost effective route to changing or replacing the cable?

Cheers me dears!

Brainx3

Hi,


I have ordered my 4th cell cable with the T piece from Delta P's dealer about 4 months ago here in Sweden, and the dealer asked me before he made the order whether I had 2 pins or 7 pins connector so I had to specify and got the right kit. My personal opinion would be to contact the place where you got the cable from in order to replace it for you instead of modifying it yourself. After all, in case of any problem I would blame the company who made it.


Best Regards. Wael

__________________
The depth of life cannot be measured in Bars, nor can the sea of lies, that lies within.

Sooner or later I'll be cracking your market and end your game.

I don't take crap for an answer...

windymiller

Have you tried Narked at 90?

chrismc

As mentioned the best bet is to switch the 2 pin cable for the 7 pin cable, if possible.

If thats not possible, you can order a new cable only from a delatP dealer for about £115.

if you really want to do it yourself, you could make your own adapter, with a 7 pin fischer plug, and 2 pin socket (not sure what part this would be), but the main issue would be waterproofing the adapter.

Alternatively you could cut off the 2 pin connector leving, and just remount aa 7 pin fischer. Once again the main issue would be waterproofing the cable.