VR3 and the Evo

Bazza · 10th March 2005, 06:36

Okay guys how do you attach the VR3 forth cell to the Evo ... any suggestions?

regards Baz

***caveseeker7*** · 10th March 2005, 08:35

Scissors & P-port, T-holder in rear inhalation hose, ask Kevin to make a new adapter.

Why not get the APD deco software, it'll run off all three sensors?

FathomsDown · 11th March 2005, 09:15

Quote: (Originally Posted by Bazza)

Okay guys how do you attach the VR3 forth cell to the Evo ... any suggestions?

The only way I am aware of doing this is to drill through the head and use a straight through connector (like a Uri HUD). I spoke with Delta-P at LIDS and they said that they were not planning any Evo/Inspo 2 support for the VR3 for the time being as they were concentrating development on the Horror Bus.

Mdemon · 11th March 2005, 11:29

If you jump onto the other thread about 6 hour scrubbers you'll find a link. Browse to it and look for the 5 cell replacement tube. This extends out of the head and removes the need for any head drilling!

Either drill into the flat sections and fit a gland or connector, or buy the next model up which has the connector for the VR3 built in.

Hope this helps... I assume the VR£ is for backup?

10th March 2005, 06:36	#1 (permalink)
Bazza New Member Current Rebreather/s: Inspiration Classic Inspiration Vision Evolution rEvo Other CCR Dolphin Other Rebreather/s: Prism Topaz Sport Kiss Classic Kiss MK 15.X rEvo Other CCR Dolphin Join Date: Feb 2005 Location: Australia Posts: 174	VR3 and the Evo Okay guys how do you attach the VR3 forth cell to the Evo ... any suggestions? regards Baz
(Offline)

10th March 2005, 08:35	#2 (permalink)
*caveseeker7* Who loves ya, baby Current Rebreather/s: Sport Kiss Other Rebreather/s: Prism Topaz Join Date: Jan 2005 Location: Too far from Neverland Posts: 5,560	Scissors & P-port, T-holder in rear inhalation hose, ask Kevin to make a new adapter. Why not get the APD deco software, it'll run off all three sensors? __________________ Cheers Stefan "Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.!"
(Offline)

11th March 2005, 09:15	#3 (permalink)
FathomsDown New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Vision Join Date: Feb 2005 Location: London Posts: 76	Quote: (Originally Posted by Bazza) Okay guys how do you attach the VR3 forth cell to the Evo ... any suggestions? The only way I am aware of doing this is to drill through the head and use a straight through connector (like a Uri HUD). I spoke with Delta-P at LIDS and they said that they were not planning any Evo/Inspo 2 support for the VR3 for the time being as they were concentrating development on the Horror Bus. __________________ Dive deep, stay long, deco for friggin' ages.
(Offline)

11th March 2005, 11:29	#4 (permalink)
Mdemon SiegeEngine II Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Inspiration Classic Home Build Join Date: Feb 2007 Location: SWUK Posts: 1,946	Put your drill away... If you jump onto the other thread about 6 hour scrubbers you'll find a link. Browse to it and look for the 5 cell replacement tube. This extends out of the head and removes the need for any head drilling! Either drill into the flat sections and fit a gland or connector, or buy the next model up which has the connector for the VR3 built in. Hope this helps... I assume the VR£ is for backup? __________________ www.southwestmafia.com "small minds talk about people, Average Minds Talk About Events, GREAT MINDS TALK ABOUT IDEAS!" The WRONG Attitude will get you killed. "Once the agenda-monkeys and perfect-worlders have moved on, perhaps we can do some diving?"
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode