DIN leak

Magic Rat · 6th July 2007, 18:55

This may have been covered lots of times before ,but how do you stop the inspiration classic din fittings leaking on ist fitting.I seem to loose 50 bar each time taking them on and off to get them to seal.Didn't have this problem with me twin sett!!! Help please.

***Decodiver*** · 6th July 2007, 20:04

OK this is real simple......

Check that the o-rings are not flat and given the problem you are having, change them for new anyway.

Before you fit the first stage, lick the o-ring to put some saliva on it whilst it is seated in the DIN fitting, you should have no further problems......

Cheers,

Dave cooper.

Magic Rat · 6th July 2007, 23:20

Many thanks i will try that tomorrow.Cheers

6th July 2007, 18:55	#1 (permalink)
Magic Rat New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jun 2007 Location: Wales Posts: 34	DIN leak This may have been covered lots of times before ,but how do you stop the inspiration classic din fittings leaking on ist fitting.I seem to loose 50 bar each time taking them on and off to get them to seal.Didn't have this problem with me twin sett!!! Help please. __________________ Reassuringly negative
(Offline)

6th July 2007, 20:04	#2 (permalink)
*Decodiver* Administrator Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Jan 2005 Location: Geneva Posts: 2,194	Re: DIN leak OK this is real simple...... Check that the o-rings are not flat and given the problem you are having, change them for new anyway. Before you fit the first stage, lick the o-ring to put some saliva on it whilst it is seated in the DIN fitting, you should have no further problems...... Cheers, Dave cooper. __________________ CCR/OC Trimix Instructor Trainer CCR Training to Mixed Gas in Switzerland, France, UK & Germany on Megalodon/COPIS-Megalodon/KISS/Sport KISS/Ouroboros/rEvo/Inspiration/Evolution/Sentinel www.zerogravitydiving.com Rebreather World Terms & Conditions
(Offline)

6th July 2007, 23:20	#3 (permalink)
Magic Rat New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jun 2007 Location: Wales Posts: 34	Re: DIN leak Many thanks i will try that tomorrow.Cheers __________________ Reassuringly negative
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode