Looking for an inline low profile Manual Add Valve

gtzavelas · 7th April 2010, 06:58

Hi,
I am looking for a Manual Add Valve (inline) that is also as small as possible

any ideas???

I have seen this at Golem , buts I dont need the offboard connections and its expensive...

Stephane · 7th April 2010, 07:05

Hello,

Maybe the one from Tecme?

T0305 and it costs 85€.

gtzavelas · 7th April 2010, 07:21

thanks!
have visited the techme site many times but missed that one!
looks more reasonable

Quote: (Originally Posted by Stephane)

Hello,

Maybe the one from Tecme?

T0305 and it costs 85€.

Brainx3 · 7th April 2010, 12:16

Here's another option:

OmniSwivel Manual Injection/Addition Valve

Regards. Wael

divetheworld · 7th April 2010, 12:52

Quote: (Originally Posted by Stephane)

Looks like a copy of the JJ-CCR one.

Whats the matter with the Golem one? Just put a low pressure port plug in the off-board port. Better to have it and not need it then need it and not have it.
I like the Golem one, its simple, small and well made. You get what you pay for. I think its good value.

lizardland · 7th April 2010, 13:09

Quote: (Originally Posted by divetheworld)

Looks like a copy of the JJ-CCR one.

There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators:

EDIT: Here you go, made by Andy_C in 2006:

divetheworld · 7th April 2010, 13:15

Quote: (Originally Posted by lizardland)

There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators:

thats doesnt look quite as similar.

jaap · 7th April 2010, 14:43

Quote: (Originally Posted by lizardland)

There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators:

EDIT: Here you go, made by Andy_C in 2006:

Yes, the pressurized side in all of these versions looks like it comes straight from an old Buddy inflator...

I even made myself a very DIY version of this from a Buddy inflator, also back in 2006:

Lidingö 14/10

To continue on the topic of this thread, I did a follow up, with the possibility to combine it with the BCD-inflator:

Alternativ gastillförsen för KISSen

/Anders

dave t · 7th April 2010, 15:45

Quote: (Originally Posted by lizardland)

There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators:

EDIT: Here you go, made by Andy_C in 2006:

yep made from my design thats even my hand in that pic

lizardland · 7th April 2010, 17:13

Quote: (Originally Posted by dave t)

yep made from my design thats even my hand in that pic

Well there you go, full circle

7th April 2010, 06:58	#1 (permalink)
gtzavelas RBW Member Megalodon RB80 Clone, CastoroC96, RGU Join Date: Jan 2006 Location: Athens,Greece Posts: 503	Looking for an inline low profile Manual Add Valve Hi, I am looking for a Manual Add Valve (inline) that is also as small as possible any ideas??? I have seen this at Golem , buts I dont need the offboard connections and its expensive...
(Offline)

7th April 2010, 07:05	#2 (permalink)
Stephane Stéphane Acounis rEvo3 rMS rEvo2 HH, rEvo1 Join Date: Nov 2005 Location: Nantes - France Posts: 1,294	Re: Looking for an inline low profile Manual Add Valve Hello, Maybe the one from Tecme? T0305 and it costs 85€.
(Offline)

7th April 2010, 07:21	#3 (permalink)
gtzavelas RBW Member Megalodon RB80 Clone, CastoroC96, RGU Join Date: Jan 2006 Location: Athens,Greece Posts: 503	Re: Looking for an inline low profile Manual Add Valve thanks! have visited the techme site many times but missed that one! looks more reasonable Quote: (Originally Posted by Stephane) Hello, Maybe the one from Tecme? T0305 and it costs 85€.
(Offline)

7th April 2010, 12:16	#4 (permalink)
Brainx3 Wael AL-Jareh Inspiration Vision with BOB Ray, Evolution, Insp. Classic Join Date: Aug 2007 Location: International Waters Posts: 682	Re: Looking for an inline low profile Manual Add Valve Here's another option: OmniSwivel Manual Injection/Addition Valve Regards. Wael __________________ Euro Diving Zone (HP Kevlar Fiber Hoses, LP Thermoplastic Hoses, Oxygen Boosters, Carbon Fiber Cylinders, SS Fittings) TDI Inspiration/Evolution Instructor SITEC Oxygen Boosters
(Online)

7th April 2010, 12:52	#5 (permalink)
divetheworld Brent - Narked at 90 Deep Pursuit or a Camelion and 11 others inc. a UT-240 Join Date: Mar 2005 Location: Prescot, England Posts: 2,424	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by Stephane) Looks like a copy of the JJ-CCR one. Whats the matter with the Golem one? Just put a low pressure port plug in the off-board port. Better to have it and not need it then need it and not have it. I like the Golem one, its simple, small and well made. You get what you pay for. I think its good value. __________________ Copying skips understanding. Understanding is how you grow. You have to understand why something works or why something is how it is. When you copy it, you miss that. *WWW.NARKEDAT90.COM* www.puwer.co.uk PUWER and Machinery CE Marking www.ce-eu.com
(Offline)

7th April 2010, 13:09	#6 (permalink)
lizardland Acme Serpentine Lubricant Join Date: Mar 2005 Location: North... Posts: 2,319	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by divetheworld) Looks like a copy of the JJ-CCR one. There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators: EDIT: Here you go, made by Andy_C in 2006: Last edited by lizardland; 7th April 2010 at 13:13..
(Offline)

7th April 2010, 13:15	#7 (permalink)
divetheworld Brent - Narked at 90 Deep Pursuit or a Camelion and 11 others inc. a UT-240 Join Date: Mar 2005 Location: Prescot, England Posts: 2,424	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by lizardland) There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators: thats doesnt look quite as similar. __________________ Copying skips understanding. Understanding is how you grow. You have to understand why something works or why something is how it is. When you copy it, you miss that. *WWW.NARKEDAT90.COM* www.puwer.co.uk PUWER and Machinery CE Marking www.ce-eu.com
(Offline)

7th April 2010, 14:43	#8 (permalink)
jaap Normal people worry me Join Date: Jun 2005 Location: Stockholm Sweden Posts: 627	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by lizardland) There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators: EDIT: Here you go, made by Andy_C in 2006: Yes, the pressurized side in all of these versions looks like it comes straight from an old Buddy inflator... I even made myself a very DIY version of this from a Buddy inflator, also back in 2006: Lidingö 14/10 To continue on the topic of this thread, I did a follow up, with the possibility to combine it with the BCD-inflator: Alternativ gastillförsen för KISSen /Anders
(Offline)

7th April 2010, 15:45	#9 (permalink)
dave t RBW Member Join Date: May 2005 Location: UK Posts: 932	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by lizardland) There was someone on here making them long before that. Can't remember who it was, might still have the PM, but they were a stainless body into which was fitted one of those old Buddy inflator buttons that came off the old style ABLJ inflators: EDIT: Here you go, made by Andy_C in 2006: yep made from my design thats even my hand in that pic
(Offline)

7th April 2010, 17:13	#10 (permalink)
lizardland Acme Serpentine Lubricant Join Date: Mar 2005 Location: North... Posts: 2,319	Re: Looking for an inline low profile Manual Add Valve Quote: (Originally Posted by dave t) yep made from my design thats even my hand in that pic Well there you go, full circle
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode