IDA Tools Needed

Captain Calamity · 23rd July 2008, 23:03

My IDA-76 has now arrived, but without any tools. In particular I need the spanner which tightens the scrubber nuts (I think it's the same size for the filler cover and the counterlung connector), and the tool that allows me to remove the OPV from the CL so that I can get to the T piece inside.

Anybody with a spare set of tools they want to sell for a sensible price?

CC

carcharodon1957 · 24th July 2008, 07:36

Hi,

You don't need to use this tool,
To maintain or to dive, all lock have to be thightened by hand!
The spanner have to be used just for total removing (for re-built) so a long nose plier is ok for that job!

Lubricate ring is really suffiscient to proof the rig, and in consequence, if you have a problem just before the dive, you don't need this spanner to open your rig/box!

Bernard

23rd July 2008, 23:03	#1 (permalink)
Captain Calamity New Member Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Mar 2007 Location: UK Posts: 10	IDA Tools Needed My IDA-76 has now arrived, but without any tools. In particular I need the spanner which tightens the scrubber nuts (I think it's the same size for the filler cover and the counterlung connector), and the tool that allows me to remove the OPV from the CL so that I can get to the T piece inside. Anybody with a spare set of tools they want to sell for a sensible price? CC
(Offline)

24th July 2008, 07:36	#2 (permalink)
carcharodon1957 RBW Member Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Oct 2006 Location: switzerland Posts: 106	Re: IDA Tools Needed Hi, You don't need to use this tool, To maintain or to dive, all lock have to be thightened by hand! The spanner have to be used just for total removing (for re-built) so a long nose plier is ok for that job! Lubricate ring is really suffiscient to proof the rig, and in consequence, if you have a problem just before the dive, you don't need this spanner to open your rig/box! Bernard
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode