hose sizes

david_1 · 2nd March 2008, 20:59

loop connections the fitting that fit loop hoses all look about the same size is this a know fitting and thread size ?

sorry if question is badly worded I dont dive a rebreather just curious

David

Packhorse · 2nd March 2008, 22:43

I think you will find there is very little that is standard on rebreathers.
Diffrent manufactures will use diffrent sizes and diffrent fittings on various models.
For example the Russian IDA 64 uses smaller hoses and fittings than the IDA 71. Which inturn (I believe) has smaller hoses and fittings than the IDA 72.
Dragar commonly use the "P Port" system. Others use hose clamps.

2nd March 2008, 20:59	#1 (permalink)
david_1 New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jul 2006 Location: uk Posts: 37	hose sizes loop connections the fitting that fit loop hoses all look about the same size is this a know fitting and thread size ? sorry if question is badly worded I dont dive a rebreather just curious David
(Offline)

2nd March 2008, 22:43	#2 (permalink)
Packhorse Custom Title Allowed! Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Auckland New Zealand Posts: 100	Re: hose sizes I think you will find there is very little that is standard on rebreathers. Diffrent manufactures will use diffrent sizes and diffrent fittings on various models. For example the Russian IDA 64 uses smaller hoses and fittings than the IDA 71. Which inturn (I believe) has smaller hoses and fittings than the IDA 72. Dragar commonly use the "P Port" system. Others use hose clamps. __________________ There are no stupid questions, but there are a LOT of inquisitive idiots.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode