glue for delrin

**jmurba** · 29th January 2008, 21:25

Quote: (Originally Posted by WD8CDH)

I would suggest talking to Master Bond. They make glues for practacally any plastic for industrial use.Master Bond Substrate Reference Table

thanks
as a matter of fact they have a glue for delrin
regards
jean mi

**SeaBass** · 30th January 2008, 05:37

Quote: (Originally Posted by jmurba)

I had thought of gluing delrin observing my tecme cell holder, I thought my tecme cell holder was made of delrin.

....but I doubt it is made of delrin now .

I think it must be a sort of pvc, martin wil confirm or deny this "info"

The Tecme parts are "Black PVC" and are glued.

Thom

**jmurba** · 30th January 2008, 07:32

Quote: (Originally Posted by SeaBass)

The Tecme parts are "Black PVC" and are glued.

Thom

Hi,
thanks for info,
I've looked for black pvc in france in vain,
it is difficult do find some,
in addition I would prefer using delrin eventualy, even if my tecme parts are working pretty well.
I have to feed my lathe with new projets ((((-:
intead of glueing the pipes in the sensor holder hole, I am gonna try to taper the holes internaly and the pipes externaly and then secure the pipe with teflon tape ...old plumbing methods will certainely go on working (((-:
regards
jean mi

29th January 2008, 21:25	#11 (permalink)
jmurba wet bear Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: May 2006 Location: cannes france Posts: 920	Re: glue for delrin Quote: (Originally Posted by WD8CDH) I would suggest talking to Master Bond. They make glues for practacally any plastic for industrial use.Master Bond Substrate Reference Table thanks as a matter of fact they have a glue for delrin regards jean mi __________________ when will I be able to think about something else then spending hours underwater, when will I be normal ? http://web.mac.com/jmurba/Site_2/home.html http://web.mac.com/jmurba/Site_3/home.html
(Offline)

30th January 2008, 05:37	#12 (permalink)
SeaBass Thom Susko Current Rebreather/s: Megalodon Ray Home Build Other Rebreather/s: Not Bought Yet Ray Home Build Join Date: Jul 2006 Location: San Clemente, CA Posts: 246	Re: glue for delrin Quote: (Originally Posted by jmurba) I had thought of gluing delrin observing my tecme cell holder, I thought my tecme cell holder was made of delrin. ....but I doubt it is made of delrin now . I think it must be a sort of pvc, martin wil confirm or deny this "info" The Tecme parts are "Black PVC" and are glued. Thom
(Offline)

30th January 2008, 07:32	#13 (permalink)
jmurba wet bear Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: May 2006 Location: cannes france Posts: 920	Re: glue for delrin Quote: (Originally Posted by SeaBass) The Tecme parts are "Black PVC" and are glued. Thom Hi, thanks for info, I've looked for black pvc in france in vain, it is difficult do find some, in addition I would prefer using delrin eventualy, even if my tecme parts are working pretty well. I have to feed my lathe with new projets ((((-: intead of glueing the pipes in the sensor holder hole, I am gonna try to taper the holes internaly and the pipes externaly and then secure the pipe with teflon tape ...old plumbing methods will certainely go on working (((-: regards jean mi __________________ when will I be able to think about something else then spending hours underwater, when will I be normal ? http://web.mac.com/jmurba/Site_2/home.html http://web.mac.com/jmurba/Site_3/home.html
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode