Apeks DS4 Question

**Dave1w** · 16th December 2007, 08:04

Is it vital to seal the plug that you would use to fix the IP, (as seen on the various plugs available) or can you get away with cutting down the load transmitter so that it doesn't contact the internal diaphram?

Cheers
Dave

**Scott** · 16th December 2007, 10:12

isc cuts the thing.. leaves the original diaphragm intact..

Brett B Hemphill · 16th December 2007, 21:24

Even if you cut the load transmitter down you still must seal the chamber from outside pressure and the diaphram wouldn't be enought to keep greater pressures from making the IP jump.
Hope I'm understanding you question correctly. :-)

Buy a cap from Narked @90...

16th December 2007, 08:04	#1 (permalink)
Dave1w Born Again Diver! Current Rebreather/s: Sport Kiss Dolphin Ray Home Build Other Rebreather/s: Classic Kiss Dolphin Ray Home Build Join Date: Jan 2005 Location: Singapore / UK Posts: 378	Apeks DS4 Question Is it vital to seal the plug that you would use to fix the IP, (as seen on the various plugs available) or can you get away with cutting down the load transmitter so that it doesn't contact the internal diaphram? Cheers Dave __________________ This message may contain spelling mistakes as it was generated by an idiot.
(Online)

16th December 2007, 10:12	#2 (permalink)
Scott Supporting Member Current Rebreather/s: Other CCR Other Rebreather/s: Megalodon Other CCR Join Date: Mar 2006 Location: Mendota, Virginia Posts: 181	Re: Apeks DS4 Question isc cuts the thing.. leaves the original diaphragm intact..
(Online)

16th December 2007, 21:24	#3 (permalink)
Brett B Hemphill EXPLORER Current Rebreather/s: Classic Kiss Other Rebreather/s: Not Bought Yet Megalodon Sport Kiss Classic Kiss MK 15.X Optima Join Date: Nov 2007 Location: Dade City Florida Posts: 14	Re: Apeks DS4 Question Even if you cut the load transmitter down you still must seal the chamber from outside pressure and the diaphram wouldn't be enought to keep greater pressures from making the IP jump. Hope I'm understanding you question correctly. :-) Buy a cap from Narked @90...
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode