Inspo/Vison T piece thread sizes??

Drmike · 20th June 2007, 07:17

Hi List,

Does anyone know the specs for the threads on the inhale and exhale T pieces?

cheers

M

decoweenie · 20th June 2007, 08:18

There are different versions of threads AFAIK:

Finer thread version which is the original standard thread on the old Classic units. And on older ADV.
Coarser thread version which is on the newer units and new ADV.

Other than that, I don't have the dimensional details...

20th June 2007, 07:17	#1 (permalink)
Drmike RBW Member Current Rebreather/s: MK 15.X Ouroboros Other CCR Home Build Other Rebreather/s: Inspiration Classic Other CCR Home Build Join Date: Feb 2005 Posts: 3,378	Inspo/Vison T piece thread sizes?? Hi List, Does anyone know the specs for the threads on the inhale and exhale T pieces? cheers M __________________ Cave diving is a sport Wreck diving is a sport Diving in general is a sport 'Rebreather diving' is not a sport its the delusional obsession with a highly dangerous and often inappropriate piece of equipment
(Offline)

20th June 2007, 08:18	#2 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Re: Inspo/Vison T piece thread sizes?? There are different versions of threads AFAIK: Finer thread version which is the original standard thread on the old Classic units. And on older ADV. Coarser thread version which is on the newer units and new ADV. Other than that, I don't have the dimensional details... __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode