P-Port O-ring dimensions???

bythesea · 22nd May 2007, 03:24

Hi Folks,
Anybody got actual 0-ring dimensions or better yet McMaster P/N for suitable o-rings? I have all the dimensions of the holder, which is done, but I 'm not sure if I should go with "fits in slot but narrower" or wider than slot force it"
Thanks, Brad

**Dave Sutton** · 22nd May 2007, 03:28

Quote: (Originally Posted by bythesea)

Hi Folks,
Anybody got actual 0-ring dimensions or better yet McMaster P/N for suitable o-rings? I have all the dimensions of the holder, which is done, but I 'm not sure if I should go with "fits in slot but narrower" or wider than slot force it"
Thanks, Brad

How about "just right" from Sears Hardware?

Truly: Any hardware store will have one that works in the plumbing section.

The width is the same as the slot, and the diameter ought to be a "slight" "stretch over the plug" fit.

Dave

bythesea · 22nd May 2007, 03:51

Thanks Dave,
I had a feeling you'd have the answer,,,LOL. I owe you another beer.
Regards, Brad

Woz · 22nd May 2007, 09:57

It's a BS122 O ring if that's any help. About 0.001 pence each.

bythesea · 22nd May 2007, 12:00

Thanks Woz,
Thats the dimension I came up with as well,,,beer for you as well.
Regards, Brad

22nd May 2007, 03:24	#1 (permalink)
bythesea RBW Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Nov 2006 Location: W.Mass, USA Posts: 75	P-Port O-ring dimensions??? Hi Folks, Anybody got actual 0-ring dimensions or better yet McMaster P/N for suitable o-rings? I have all the dimensions of the holder, which is done, but I 'm not sure if I should go with "fits in slot but narrower" or wider than slot force it" Thanks, Brad
(Online)

22nd May 2007, 03:28	#2 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Evolution Megalodon rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,907	Re: P-Port O-ring dimensions??? Quote: (Originally Posted by bythesea) Hi Folks, Anybody got actual 0-ring dimensions or better yet McMaster P/N for suitable o-rings? I have all the dimensions of the holder, which is done, but I 'm not sure if I should go with "fits in slot but narrower" or wider than slot force it" Thanks, Brad How about "just right" from Sears Hardware? Truly: Any hardware store will have one that works in the plumbing section. The width is the same as the slot, and the diameter ought to be a "slight" "stretch over the plug" fit. Dave __________________ "Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com
(Offline)

22nd May 2007, 03:51	#3 (permalink)
bythesea RBW Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Nov 2006 Location: W.Mass, USA Posts: 75	Re: P-Port O-ring dimensions??? Thanks Dave, I had a feeling you'd have the answer,,,LOL. I owe you another beer. Regards, Brad
(Online)

22nd May 2007, 09:57	#4 (permalink)
Woz Custom Title Allowed! Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Jun 2005 Location: Nottingham Posts: 186	Re: P-Port O-ring dimensions??? It's a BS122 O ring if that's any help. About 0.001 pence each. __________________ Still punting shiny diving tatt to gullible divers www.kitfondle.co.uk
(Offline)

22nd May 2007, 12:00	#5 (permalink)
bythesea RBW Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Nov 2006 Location: W.Mass, USA Posts: 75	Re: P-Port O-ring dimensions??? Thanks Woz, Thats the dimension I came up with as well,,,beer for you as well. Regards, Brad
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode