McMaster Carr CMF orifices and filters

Dave Sutton

Yes, YEs YES!!! I'll be home MONDAY....


(the race is on..... )




Dave

__________________
"Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com

marekm

I'm expecting the order to come in within 2 weeks. But since you and I both live and Brisbane, I can just drop the parts you order at your house. So tell me what parts you want soon, and I'll add them to the order when I send it on Monday (in addition to Corallaro and Koputais parts).

PS: Didn't I buy a Scubapro Rec/Tec BC from you on ebay?

sadave

Mate, I didn't want any parts for myself. Was just offering to help with delivery for anyone that would be in Sydney for oztek...

As for the BC... ummm, NFI, I have sold both of my scubapro wings on ebay, but not a bc / harness etc... I still have that, and use it regularly.

__________________

Corallaro

Hi Marekm

with this shipments cost the order is ok for me but, i see that denzel is also interested to my parts, if it need it is also ok for me.

saturday my old order of mcmastercarr is arrived an i tested it!

with 10 micron filter at surface it work well

respect the kiss table (9 bar ip 0.57 l/min)

but the orifice is the most economical orifice that i see

no insert as i think, a simple orifice in the brass or on ss in ss type

Giovanni

marekm

CORALLARO:
Thanks for the info Giovanni. I'll order your parts and keep them just in case (for me, or denzel or anyone else who wants one). Just to confirm, you have actually tested 0.57L at 9bar or just read it in the KISS table?

TOM:
Hi Tom, have you ordered from McMaster Carr yet? If not, please wait unitl you have the money from me. In the mean time, here is the final order for which I will wire the money as soon as get the rest of those bank details:

2X 3820K11 Pulsation-Damping Snubber Brass, 1/8" NPT, .004" Orifice, 2000 PSI US$16.08
3X 3820K41 Pulsation-Damping Snubber Type 303 SS, 1/8" NPT, .004" Orifice, 4000 PSI US$51.27
1X 4034K62 Pulsation-Damping Snubber with Filtering Disc Brass, 1/8" NPT Connections, 40 to 45 Micron, 3000 PSI US$7.98
1X 44555K131 Brass Double-Barbed Vacuum Tube Fitting Barbed X NPT Male for 1/4" Tube ID, 1/8" NPT US$1.38
1X 4034K61 Pulsation-Damping Snubber with Filtering Disc Brass, 1/8" NPT Connections, 10 Micron, 3000 PSI US$7.98
1X 44555K124 Brass Double-Barbed Vacuum Tube Fitting Barbed X NPT Female for 1/4" Tube ID, 1/8" NPT US$2.77
1X 4034K66 Pulsation-Damping Snubber with Filtering Disc 303 SS, 1/8" NPT Connections, 40-45 Micron, 5000 PSI US$10.16

SUB TOTAL 97.62

postage McMaster Carr to Tom 5
postage Tom to Marek 16
a bit extra to cover potential banking fees 11.38
TOTAL US$130

Scuttle

1X 3820K11 US$8.04 Pulsation-Damping Snubber Brass, 1/8" NPT, .004" Orifice, 2000 PSI

G'day Guys,
I will take one of the above if there are any spares & I'll be at Oztek for the handball. thanks

__________________
sold CK182 now its CK243

Corallaro

Hi Marekm

i test it

on gauge i read 8,9 bar
on flowmwter i read 0.6 litres/min but the flowmwter is for air
on my conversione table
read 0.6 = 0.57 O2


note
the flowmeter is connect after an Clippard MJSV-1 Shuttle 1/8 "OR" Valve

PS

but.....wht time is it now in Australia.....in italy is 11:10 AM
when you sleep??

marekm

Its currently 9:30PM in Australia, and I sleep a few hours when I have time.

Corallaro

I see better my test result and kiss manual...

that are similar at 0,0035 kiss orifice...but mcmaster orifice is an 0,004

there is something that i don't understand.....

later i make more tests at different ip and with pen and paper..

Giovanni

Tom Rose

In an earlier post, that is what I reported using a bubblemeter....nice to agree with someone on this forum.

Tom

__________________
The 50-50-90 rule: Anytime I have a 50-50 chance of getting something right, there's a 90% probability I'll get it wrong the first time.

www.atlimp.com