McMaster Carr CMF orifices and filters

**Dave Sutton** · 12th April 2007, 00:49

Quote: (Originally Posted by Corallaro)

I think is enough high up on my back if you see the 3rd photo...or i make it more high?

The position seems perfect. Make sure it is close to the back! Not floating away from it. Sometimes it will look OK when "feet down" as it floats towards the head of the diver, but when the diver is face-down it floats away from the back, and this is a WOB problem.

With that said, you have finished the main part, so you are entitled to the following:

Be it known by all men who read this, that our friend GIOVANNI has constructed a close blood relative of Franken-Son which has been found worthy, has dived it without harm to himself, and did so without frightening farm animals, small children, or his dive buddy, and has lived to tell the tale and ask further questions (albeit it not in hand signals as he is still thawing out his fingers).

His rebreather is thus entitled to the coveted

"Diver Dave Seal of Approval"

and is further entitled to all honors that accrue such distinction

Well done!

Dave

Corallaro · 12th April 2007, 09:17

Great!!!

I print it and will find one just frame

in order to conclude this is my cheap pressure pot

1) diluent through the sensor holder
2) sensors
3) p-port
4) overpressure valve
5) 1 bar fs gauge
6) swagelok fine metering valve
7) O2 bottle and first stage
8) out ball valve to oxygen analizer
9) p-port on couterlung

**Dave Sutton** · 12th April 2007, 11:44

Quote: (Originally Posted by Corallaro)

in order to conclude this is my cheap pressure pot

Man, you're gonna get more than a seal of approval. Maybe be the Italian Office for the Little Diveshop of Horrors.....

Dave

Corallaro · 12th April 2007, 16:06

YES Dave......

a new Italian Office for the Little Diveshop of Horrors is ready !!!!!!!!!!!

I have grown reading “nobubblediving” and this is the monstrous result.

But, it is only the beginning…ah ah ah.....

**Dave Sutton** · 12th April 2007, 20:13

We'e created a Monster.....

Dave

12th April 2007, 00:49	#91 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Evolution Megalodon rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,907	Re: McMaster Carr CMF orifices and filters Quote: (Originally Posted by Corallaro) I think is enough high up on my back if you see the 3rd photo...or i make it more high? The position seems perfect. Make sure it is close to the back! Not floating away from it. Sometimes it will look OK when "feet down" as it floats towards the head of the diver, but when the diver is face-down it floats away from the back, and this is a WOB problem. With that said, you have finished the main part, so you are entitled to the following: Be it known by all men who read this, that our friend GIOVANNI has constructed a close blood relative of Franken-Son which has been found worthy, has dived it without harm to himself, and did so without frightening farm animals, small children, or his dive buddy, and has lived to tell the tale and ask further questions (albeit it not in hand signals as he is still thawing out his fingers). His rebreather is thus entitled to the coveted "Diver Dave Seal of Approval" and is further entitled to all honors that accrue such distinction Well done! Dave __________________ "Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com Last edited by Dave Sutton : 12th April 2007 at 01:47.
(Offline)

12th April 2007, 11:44	#93 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Evolution Megalodon rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,907	Re: McMaster Carr CMF orifices and filters Quote: (Originally Posted by Corallaro) in order to conclude this is my cheap pressure pot Man, you're gonna get more than a seal of approval. Maybe be the Italian Office for the Little Diveshop of Horrors..... Dave __________________ "Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com
(Offline)

12th April 2007, 16:06	#94 (permalink)
Corallaro IDA-71,IDA-76,NaubosAR90 Current Rebreather/s: Other CCR Other Rebreather/s: Not Bought Yet Other CCR Join Date: Oct 2006 Location: Italia - Sicilia Posts: 248	Re: McMaster Carr CMF orifices and filters YES Dave...... a new Italian Office for the Little Diveshop of Horrors is ready !!!!!!!!!!! I have grown reading “nobubblediving” and this is the monstrous result. But, it is only the beginning…ah ah ah.....
(Offline)

12th April 2007, 20:13	#95 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Evolution Megalodon rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,907	Re: McMaster Carr CMF orifices and filters We'e created a Monster..... Dave __________________ "Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode