manifold source?

cameron

Where can I purchase an RB80 style flexible manifold?

caveseeker7

STDE offers something like it for their EDO-04, check the SCR links for their website and contact info.

__________________
Cheers
Stefan



"Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media,
which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.'!"

montyg

Gas Distribution Block from STDE 476 Euros


http://www.stde.ch/en/edo04/options.php

or the Shackle Block from Divematics USA

US$145 ( bare manifold with no valves or QD's )
http://www.divenet.com/divematics/price.html
and photos here
http://www.divenet.com/divematics/shackleblock/

rgds
monty

cameron

I was actually looking for the manifold between the cylinders on either side of the scrubber. The isolation manifold

decoweenie

Make it, it is very simple.

I just sold mine (to an EDO diver) which was left over from the Halcyon "fridge" days. It was a simple face-seal type (not barrel seal type) twinset manifold.

On one side (i.e. right), leave the isolator connected to the tank valve as normal.

Machine a simple round SS tube to screw into the other end of the isolator to seal as if it is screwed into the left tank valve. On the other side of the tube, tap 1/4" NPT hole.

On the left tank valve, tap 1/4" NPT hole.

Now, you just get any Swagelok flexible hose or tubing to screw into the 1/4" NPT holes to connect them.

That's approximately the way most of the original PVR-BASC isolation manifold were built as well. The idea of the SS tube is you could simply remove it to re-use the manifold with twinset as normal.

"Ali" (on this board) who bought my manifold might be able to send you the picture.