An O2 sensor pressure pot finally available

rdmmdr · 23rd November 2006, 03:31

Hi Guys

While Ron Is Doing His O2 Pot, And Getting It Ready For Service. All You Have To Do Is Stop By Home Depot And Buy Some Pipe Fittings. Remember That The Cell Reqiures A Load Resister 10k And Measure The Output With A Milivolt Meter, Through The Span Of The Cell. Pressurize The Cell To 9 Bar Per The Guage And You Should See An Output Equal To 10atm Of O2 Or 2.09 Atm. This Is Not A Travel Unit Due To The Fact It Looks Like A Pipe Bomb But It Will Due The Job.
Rick

RonMicjan · 23rd November 2006, 07:57

pressurise it to 9ata and it IS a pipe bomb, let me know how that works out for ya!

paulraymaekers · 23rd November 2006, 14:40

just one issue,

the is at least one disadvantage:

molex connectors are only garanteed a limited on/off operations:
gold contacts 50 cycles, non gold contacts 25 cycles...
see the molex specs....

I don't say that they are dead after those cycles, but just to say I avoid taking the molexes out of the cells

paul

rdmmdr · 23rd November 2006, 15:59

Ron
It Works Fine The Pipe Is Rated To Three Hundred Lbs.
Rick

***Beanie*** · 23rd November 2006, 16:31

Quote: (Originally Posted by rdmmdr)

Ron
It Works Fine The Pipe Is Rated To Three Hundred Lbs.
Rick

I hope your not trying to hold that kind of pressure with your thumb

23rd November 2006, 03:31	#11 (permalink)
rdmmdr designer of death Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Mar 2006 Location: kerman,california Posts: 372	Re: An O2 sensor pressure pot finally available Hi Guys While Ron Is Doing His O2 Pot, And Getting It Ready For Service. All You Have To Do Is Stop By Home Depot And Buy Some Pipe Fittings. Remember That The Cell Reqiures A Load Resister 10k And Measure The Output With A Milivolt Meter, Through The Span Of The Cell. Pressurize The Cell To 9 Bar Per The Guage And You Should See An Output Equal To 10atm Of O2 Or 2.09 Atm. This Is Not A Travel Unit Due To The Fact It Looks Like A Pipe Bomb But It Will Due The Job. Rick
(Offline)

23rd November 2006, 07:57	#12 (permalink)
RonMicjan Cap Ron scourge of the NW Current Rebreather/s: Megalodon Dolphin Home Build Other Rebreather/s: Sport Kiss Classic Kiss Dolphin Home Build Join Date: Feb 2005 Location: Cape Disapointment, The Graveyard of the Pacific Posts: 1,120	Re: An O2 sensor pressure pot finally available pressurise it to 9ata and it IS a pipe bomb, let me know how that works out for ya! __________________ Marine rescue, towing and salvage. Interfering with natural selection since 1983. www.tmishop.com Diving bits etc. www.seatowpdx.com The Summer Job
(Offline)

23rd November 2006, 14:40	#13 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,638	Re: An O2 sensor pressure pot finally available just one issue, the is at least one disadvantage: molex connectors are only garanteed a limited on/off operations: gold contacts 50 cycles, non gold contacts 25 cycles... see the molex specs.... I don't say that they are dead after those cycles, but just to say I avoid taking the molexes out of the cells paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

23rd November 2006, 15:59	#14 (permalink)
rdmmdr designer of death Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Mar 2006 Location: kerman,california Posts: 372	Re: An O2 sensor pressure pot finally available Ron It Works Fine The Pipe Is Rated To Three Hundred Lbs. Rick
(Offline)

23rd November 2006, 16:31	#15 (permalink)
*Beanie* Gallery Administrator Current Rebreather/s: Inspiration Classic Other Rebreather/s: Inspiration Vision Join Date: Jan 2005 Location: In da house! yeah baby! Posts: 3,311	Re: An O2 sensor pressure pot finally available Quote: (Originally Posted by rdmmdr) Ron It Works Fine The Pipe Is Rated To Three Hundred Lbs. Rick I hope your not trying to hold that kind of pressure with your thumb __________________ Beanie Gallery Admin & Library Assistant. www.outlawdivers.org.uk www.beandiving.co.uk www.beanengineering.co.uk
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode