Beanie/Narked 4/5th cell

narked at 90 · 22nd July 2006, 22:33

Quote: (Originally Posted by decoweenie)

Please put me down for the first holder that fits the Vision.

hi phi sorry mate at this time i have no plans making one for the vision becuase some one else is already working on one and i dont want to tread on toes

kind regards john routley

Odin · 23rd July 2006, 09:16

It works!

Fitted into the head no problems. Snug rather than tightfit!

I promised Beanie I would take it easy so...

Being cautious.. I did two dives yesterday 8m/ 52 + 49 mins.

My buddies (I took along two as bail-out!) were amused to see me admiring myself in my mirror - an old hard drive disk - I was bubble checking every 5 mins. (still watched the Cuttlefish..)

Calibrating the VR3 PPO2 readings were spot on with the hand sets.
Frequent checking of VR3 PPO2/handset readings throughout the dive.

Removed the head between dives for a close check. Usual condensation.

Back home, unit washed and cleaned. Head looks good!
Roll on Tuesday and another dive!

Paul
p.s. anyone want a Delta 4th cell adapter and 7 pin cable?

decoweenie · 23rd July 2006, 09:37

Quote: (Originally Posted by narked at 90)

hi phi sorry mate at this time i have no plans making one for the vision becuase some one else is already working on one and i dont want to tread on toes

Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on.

So who is working on one ?

narked at 90 · 23rd July 2006, 20:28

Quote: (Originally Posted by decoweenie)

Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on.

So who is working on one ?

hi ya phi i belive Bret from divelife is working on one so in the intrest of good relastions i'm not going to make one.....pitty thou as i could have it done this week, i have a vision here for measurment before i found out..
kindest regards john routley

Mark Wan · 24th July 2006, 08:39

Quote: (Originally Posted by decoweenie)

Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on.

a bit off-topic, but can anyone point me to information on this PO2 display?

decoweenie · 24th July 2006, 14:01

Quote: (Originally Posted by Mark Wan)

a bit off-topic, but can anyone point me to information on this PO2 display?

http://www.sump4.com/rebreather/d5_c...ml#electronics

Look under electronics.

***Beanie*** · 31st July 2006, 12:54

Quote: (Originally Posted by Beanie)

The very nice Narked@90 has made a further 5 of these cell holders. They will be avaliable to ship in the early part of next week (24 July).

I have these very nice cell holders in stock ready for delivery. You to can be as happy as Pierre and Odin

Pierre Farrugia · 31st July 2006, 15:38

Quote: (Originally Posted by Beanie)

I have these very nice cell holders in stock ready for delivery. You to can be as happy as Pierre and Odin

Most probably an other one will find a caring home in Malta too, as my friend liked it and I tried mine now at 7m and was fine and 63m

, and can say I am very please with it.

22nd July 2006, 22:33	#11 (permalink)
narked at 90 John Routley Current Rebreather/s: Inspiration Classic Other CCR Dolphin Home Build Other Rebreather/s: Other CCR Dolphin Home Build Join Date: Feb 2005 Location: middlands uk Posts: 1,035	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by decoweenie) Please put me down for the first holder that fits the Vision. hi phi sorry mate at this time i have no plans making one for the vision becuase some one else is already working on one and i dont want to tread on toes kind regards john routley __________________ CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *WWW.GRPSERVICES.COM*
(Online)

23rd July 2006, 09:16	#12 (permalink)
Odin Egbert - the Deco Dancer Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: U.K Posts: 143	Re: Beanie/Narked 4/5th cell It works! Fitted into the head no problems. Snug rather than tightfit! I promised Beanie I would take it easy so... Being cautious.. I did two dives yesterday 8m/ 52 + 49 mins. My buddies (I took along two as bail-out!) were amused to see me admiring myself in my mirror - an old hard drive disk - I was bubble checking every 5 mins. (still watched the Cuttlefish..) Calibrating the VR3 PPO2 readings were spot on with the hand sets. Frequent checking of VR3 PPO2/handset readings throughout the dive. Removed the head between dives for a close check. Usual condensation. Back home, unit washed and cleaned. Head looks good! Roll on Tuesday and another dive! Paul p.s. anyone want a Delta 4th cell adapter and 7 pin cable?
(Offline)

23rd July 2006, 09:37	#13 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,510	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by narked at 90) hi phi sorry mate at this time i have no plans making one for the vision becuase some one else is already working on one and i dont want to tread on toes Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on. So who is working on one ? __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

23rd July 2006, 20:28	#14 (permalink)
narked at 90 John Routley Current Rebreather/s: Inspiration Classic Other CCR Dolphin Home Build Other Rebreather/s: Other CCR Dolphin Home Build Join Date: Feb 2005 Location: middlands uk Posts: 1,035	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by decoweenie) Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on. So who is working on one ? hi ya phi i belive Bret from divelife is working on one so in the intrest of good relastions i'm not going to make one.....pitty thou as i could have it done this week, i have a vision here for measurment before i found out.. kindest regards john routley __________________ CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *WWW.GRPSERVICES.COM*
(Online)

24th July 2006, 08:39	#15 (permalink)
Mark Wan New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Nov 2005 Location: Hammersmith, London Posts: 59	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by decoweenie) Doesn't matter where it comes from, I just want one to send to Dave Meager for installing his excellent PO2 display on. a bit off-topic, but can anyone point me to information on this PO2 display? __________________ newbie inspo vision diver
(Offline)

24th July 2006, 14:01	#16 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,510	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by Mark Wan) a bit off-topic, but can anyone point me to information on this PO2 display? http://www.sump4.com/rebreather/d5_c...ml#electronics Look under electronics. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

31st July 2006, 12:54	#17 (permalink)
*Beanie* give a man an inch....... Current Rebreather/s: Inspiration Classic Other Rebreather/s: Inspiration Vision Join Date: Jan 2005 Location: In da house! yeah baby! Posts: 3,248	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by Beanie) The very nice Narked@90 has made a further 5 of these cell holders. They will be avaliable to ship in the early part of next week (24 July). I have these very nice cell holders in stock ready for delivery. You to can be as happy as Pierre and Odin __________________ Beanie Gallery Admin & Library Assistant. www.outlawdivers.org.uk www.beandiving.co.uk www.beanengineering.co.uk 0871 242 7808
(Offline)

31st July 2006, 15:38	#18 (permalink)
Pierre Farrugia Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: Malta Posts: 636	Re: Beanie/Narked 4/5th cell Quote: (Originally Posted by Beanie) I have these very nice cell holders in stock ready for delivery. You to can be as happy as Pierre and Odin Most probably an other one will find a caring home in Malta too, as my friend liked it and I tried mine now at 7m and was fine and 63m , and can say I am very please with it. __________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" www.atlam.org www.divemed.com
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode