PO2 displays - any I've missed?

Sutty · 10th July 2006, 21:08

Quote: (Originally Posted by Ben Field)

Ditto- exactly in fact! Jetsam replaced the entire set though- you've gotta hand it to them their service is superb and I believe the product is improving all the time too.

BEN

Jetsam's service is second to none. If they produced a set of 3 independant displays with through-the-case battery recharging, and calibration without opening the units to the environment I'd be ordering now. If pressed I'd like to be able to cal on less than 100% O2, and see the cell mV on demand.

Perhaps I should start home-building

Neil

paulraymaekers · 10th July 2006, 22:10

Quote: (Originally Posted by Sutty)

Any more info on the rEvodream? A bit hard to make out from the photos, it looks like it only shows one cell value at a time. Is it available without the HUD? Can it cal at less than 1bar PO2? What about battery replacement? etc, etc

Neil

shows one cell at a time, but this is of no importance: once you start diving with a HUD, you don't look at the LCD anymore: you have all the info in front of you: nothing more fun!
at the moment, only calibration at 1 bar O2 (and you see the mV of each cell when calibrating! :-)
batterie: lifetime 250 hours functioning, +/- 10 years asleep (backlight off)
batt changing is done yourself : 2 coins Li 2450

where can I post a word doc with all the info??
regards
paul

J. V. · 10th July 2006, 22:32

My two cents about rEvodream. I use it since years now and I've never do other than changing cells.
The HUD is very pleasant to use, specially in poor visibility water like lakes or caves.
Before I use HSE PpO2 meter 3 cells, it works (and have never been flooded, not like my HSE computer!) but was more bulky and less easy to calibrate.

jean-marc · 11th July 2006, 08:47

Yes, rEvodream is a nice and reliable display.
We use it last week in very hard conditions (transport in narrow caves and swiming in silty sumps) and it works perfect !
Paul, can you put the URL where some pictures can be seen ?

paulraymaekers · 11th July 2006, 08:51

hello all, this is NOT the best way to treat your rebreather!!! :-)

http://fr.ph.groups.yahoo.com/group/...os/browse/3466

regards

paul

AMW · 11th July 2006, 09:43

I have a Dave Mager built display and it works very well as a pervious post said see Duncan site http://www.sump4.com/rebreather/d5_construction.html

You can just about see the display in the picture (and yes the hoses do get clipped in neatly

and it has a guards to protect the first stages now

Andrew.

paulraymaekers · 11th July 2006, 11:25

Quote: (Originally Posted by AMW)

I have a Dave Mager built display and it works very well as a pervious post said see Duncan site You can just about see the display in the picture (and yes the hoses do get clipped in neatly

and it has a guards to protect the first stages now

Andrew.

hello Andrew, how do yo calibrate the unit?
regards
paul

AMW · 11th July 2006, 11:31

The unit has two o-ring sealed ports unscrew the plugs then it is just a case of using a pot trimmer to set up the display to the correct level.
Andrew.

O.C.Diver · 12th July 2006, 01:19

Quote: (Originally Posted by Sutty)

I've had a few niggles with the Jetsam PO2 displays on my Kiss, so thinking of alternatives - so we have...

Jetsam originals

Sartek

Subsea Systems

Mark Munro's

Shearwater

Any I've missed?

Thanks,
Neil

I use a Hammerhead Secondary for a PO2 display on my Kiss style rebreather. There is no controller in the secondary, and as an added bonus, you get a very nice HUD which is driven by the secondary.

Ted

Dan · 12th July 2006, 05:51

Quote: (Originally Posted by O.C.Diver)

I use a Hammerhead Secondary for a PO2 display on my Kiss style rebreather. There is no controller in the secondary, and as an added bonus, you get a very nice HUD which is driven by the secondary.

Ted

Is it possible to buy just the Hammerhead secondary + Diva-HUD?
If so, how much did you pay for it?
//Regards

10th July 2006, 21:08	#11 (permalink)
Sutty Classic Kiss diver Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Jun 2005 Location: Glossop, Derbyshire, UK Posts: 801	Re: PO2 displays - any I've missed? Quote: (Originally Posted by Ben Field) Ditto- exactly in fact! Jetsam replaced the entire set though- you've gotta hand it to them their service is superb and I believe the product is improving all the time too. BEN Jetsam's service is second to none. If they produced a set of 3 independant displays with through-the-case battery recharging, and calibration without opening the units to the environment I'd be ordering now. If pressed I'd like to be able to cal on less than 100% O2, and see the cell mV on demand. Perhaps I should start home-building Neil __________________ Never forget that life is a finite resource.
(Online)

10th July 2006, 22:10	#12 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,508	Re: PO2 displays - any I've missed? Quote: (Originally Posted by Sutty) Any more info on the rEvodream? A bit hard to make out from the photos, it looks like it only shows one cell value at a time. Is it available without the HUD? Can it cal at less than 1bar PO2? What about battery replacement? etc, etc Neil shows one cell at a time, but this is of no importance: once you start diving with a HUD, you don't look at the LCD anymore: you have all the info in front of you: nothing more fun! at the moment, only calibration at 1 bar O2 (and you see the mV of each cell when calibrating! :-) batterie: lifetime 250 hours functioning, +/- 10 years asleep (backlight off) batt changing is done yourself : 2 coins Li 2450 where can I post a word doc with all the info?? regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

10th July 2006, 22:32	#13 (permalink)
J. V. Custom Title Allowed! Current Rebreather/s: rEvo Other Rebreather/s: Not Bought Yet rEvo Join Date: Mar 2006 Location: Lot & Savoie Posts: 239	Re: PO2 displays - any I've missed? My two cents about rEvodream. I use it since years now and I've never do other than changing cells. The HUD is very pleasant to use, specially in poor visibility water like lakes or caves. Before I use HSE PpO2 meter 3 cells, it works (and have never been flooded, not like my HSE computer!) but was more bulky and less easy to calibrate. __________________ -------------------- Jacques NPSFQQA-EDS IT # 007 (remué non agité)
(Online)

11th July 2006, 08:47	#14 (permalink)
jean-marc New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Inspiration Vision Join Date: Jan 2006 Location: Montpellier - France Posts: 60	Re: PO2 displays - any I've missed? Yes, rEvodream is a nice and reliable display. We use it last week in very hard conditions (transport in narrow caves and swiming in silty sumps) and it works perfect ! Paul, can you put the URL where some pictures can be seen ?
(Online)

11th July 2006, 08:51	#15 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,508	Re: PO2 displays - any I've missed? hello all, this is NOT the best way to treat your rebreather!!! :-) http://fr.ph.groups.yahoo.com/group/...os/browse/3466 regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

11th July 2006, 09:43	#16 (permalink)
AMW Andrew Martin Ward Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Oct 2005 Location: Cam ,Glos, England Posts: 171	Re: PO2 displays - any I've missed? I have a Dave Mager built display and it works very well as a pervious post said see Duncan site http://www.sump4.com/rebreather/d5_construction.html You can just about see the display in the picture (and yes the hoses do get clipped in neatly and it has a guards to protect the first stages now Andrew. __________________ AMW Blog (very poor effort :-) http://a-m-ward.blogspot.com/ http://amward.myblogsite.com/ Lot ,France cave diving sites and area resources. www.lot46.com Caving and cave diving photos http://www.flickr.com/photos/amward/
(Online)

11th July 2006, 11:25	#17 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,508	Re: PO2 displays - any I've missed? Quote: (Originally Posted by AMW) I have a Dave Mager built display and it works very well as a pervious post said see Duncan site You can just about see the display in the picture (and yes the hoses do get clipped in neatly and it has a guards to protect the first stages now Andrew. hello Andrew, how do yo calibrate the unit? regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

11th July 2006, 11:31	#18 (permalink)
AMW Andrew Martin Ward Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Oct 2005 Location: Cam ,Glos, England Posts: 171	Re: PO2 displays - any I've missed? The unit has two o-ring sealed ports unscrew the plugs then it is just a case of using a pot trimmer to set up the display to the correct level. Andrew. __________________ AMW Blog (very poor effort :-) http://a-m-ward.blogspot.com/ http://amward.myblogsite.com/ Lot ,France cave diving sites and area resources. www.lot46.com Caving and cave diving photos http://www.flickr.com/photos/amward/
(Online)

12th July 2006, 01:19	#19 (permalink)
O.C.Diver Helium Addict Current Rebreather/s: Classic Kiss Other CCR Home Build Other Rebreather/s: Not Bought Yet Other CCR Home Build Join Date: Mar 2006 Location: Salisbury MD USA Summers; Wandering Florida Winters Posts: 221	Re: PO2 displays - any I've missed? Quote: (Originally Posted by Sutty) I've had a few niggles with the Jetsam PO2 displays on my Kiss, so thinking of alternatives - so we have... Jetsam originals Sartek Subsea Systems Mark Munro's Shearwater Any I've missed? Thanks, Neil I use a Hammerhead Secondary for a PO2 display on my Kiss style rebreather. There is no controller in the secondary, and as an added bonus, you get a very nice HUD which is driven by the secondary. Ted __________________ Consider this my opinion.......sometimes I'm even right, but remember.........YMMV. Ted Green Charter Boat "OC Diver" http://www.ocdiver.com
(Offline)

12th July 2006, 05:51	#20 (permalink)
Dan New Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: May 2005 Location: SWEDEN Posts: 71	Re: PO2 displays - any I've missed? Quote: (Originally Posted by O.C.Diver) I use a Hammerhead Secondary for a PO2 display on my Kiss style rebreather. There is no controller in the secondary, and as an added bonus, you get a very nice HUD which is driven by the secondary. Ted Is it possible to buy just the Hammerhead secondary + Diva-HUD? If so, how much did you pay for it? //Regards
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode