Lubing up your Dolphin ?

ebon.hawk · 11th May 2006, 12:01

I've got Molykote 111 for applying to the o-rings that I was shown on the Dolphin course, but if I go the mCCR route, am I right in thinking I will need to use christolube on the O2 side of the system ?

Is it advisable just to use "christolube" on all parts that need to have grease applied and forget about Molykote ?

Thanks in advance.

Andy

divetheworld · 11th May 2006, 12:04

Quote: (Originally Posted by ebon.hawk)

I've got Molykote 111 for applying to the o-rings that I was shown on the Dolphin course, but if I go the mCCR route, am I right in thinking I will need to use christolube on the O2 side of the system ?

Is it advisable just to use "christolube" on all parts that need to have grease applied and forget about Molykote ?

Thanks in advance.

Andy

Use only on the pressurised parts of the system. Theres no point on ambient parts. In fact, Perflourinated polyether based lubes for ox can be a bit poor in some places.

Brent

caver95 · 11th May 2006, 12:11

My mom told me if I kept lubing my dolphin, I would go blind.

ebon.hawk · 11th May 2006, 12:19

fnaar fnaar ( finbar saunders, Viz comic !! )

:-)

11th May 2006, 12:01	#1 (permalink)
ebon.hawk New Member Current Rebreather/s: Dolphin Other Rebreather/s: Dolphin Join Date: May 2005 Location: Hoofddorp, Nederlands Posts: 59	Lubing up your Dolphin ? I've got Molykote 111 for applying to the o-rings that I was shown on the Dolphin course, but if I go the mCCR route, am I right in thinking I will need to use christolube on the O2 side of the system ? Is it advisable just to use "christolube" on all parts that need to have grease applied and forget about Molykote ? Thanks in advance. Andy
(Offline)

11th May 2006, 12:04	#2 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,511	Re: Lubing up your Dolphin ? Quote: (Originally Posted by ebon.hawk) I've got Molykote 111 for applying to the o-rings that I was shown on the Dolphin course, but if I go the mCCR route, am I right in thinking I will need to use christolube on the O2 side of the system ? Is it advisable just to use "christolube" on all parts that need to have grease applied and forget about Molykote ? Thanks in advance. Andy Use only on the pressurised parts of the system. Theres no point on ambient parts. In fact, Perflourinated polyether based lubes for ox can be a bit poor in some places. Brent __________________ Self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe Last edited by divetheworld : 11th May 2006 at 12:12.
(Offline)

11th May 2006, 12:11	#3 (permalink)
caver95 Custom Title Allowed! Current Rebreather/s: Not Bought Yet Other Rebreather/s: Megalodon Not Bought Yet Join Date: Sep 2005 Location: US Posts: 170	Re: Lubing up your Dolphin ? My mom told me if I kept lubing my dolphin, I would go blind. __________________ www.cavetek.com
(Offline)

11th May 2006, 12:19	#4 (permalink)
ebon.hawk New Member Current Rebreather/s: Dolphin Other Rebreather/s: Dolphin Join Date: May 2005 Location: Hoofddorp, Nederlands Posts: 59	Re: Lubing up your Dolphin ? fnaar fnaar ( finbar saunders, Viz comic !! ) :-)
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode