Apesks DS4 with R190 Injectors

ike · 28th February 2008, 04:38

Hey Guys!

Does anybody have experience with Apeks DS4 in combination with RB2000 injector’s scubapro R190 at high dept (100m)?
I heard they do not fit together because Apeks in high compensated and Scubapro not, and if you not screw down the middle pressure to about 6-7 bar you can have free flow in your unit?
Does anyone know about this?

All the best
Ike

pls excuse my bad english

jhaaja · 28th February 2008, 07:24

Check this out:
http://www.rebreatherworld.com/inspi...-stages-3.html

The over balancing does not rise the IP so much...

JH

ike · 28th February 2008, 09:33

Quote: (Originally Posted by jhaaja)

Check this out:
http://www.rebreatherworld.com/inspi...-stages-3.html

The over balancing does not rise the IP so much...

JH

thx man for this info!
So you set your IP to 7.4 right?

Ike

jhaaja · 28th February 2008, 09:43

On Inspiration I would have it on surface at 7bar then it should be ~7,4bar at 95m.

JH

ike · 28th February 2008, 11:46

For OC I have at 9,4 i just scared of the injectors!
Anyway will see will adjust to 7,4bar can not be worse!

Thanks again!

28th February 2008, 04:38	#1 (permalink)
ike New Member Current Rebreather/s: RB80 / Clone Other Rebreather/s: RB80 / Clone Join Date: Nov 2007 Location: austria Posts: 12	Apesks DS4 with R190 Injectors Hey Guys! Does anybody have experience with Apeks DS4 in combination with RB2000 injector’s scubapro R190 at high dept (100m)? I heard they do not fit together because Apeks in high compensated and Scubapro not, and if you not screw down the middle pressure to about 6-7 bar you can have free flow in your unit? Does anyone know about this? All the best Ike pls excuse my bad english Last edited by ike : 28th February 2008 at 06:35.
(Offline)

28th February 2008, 07:24	#2 (permalink)
jhaaja Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Mar 2005 Location: Finland Posts: 867	Re: Apesks DS4 with R190 Injectors Check this out: http://www.rebreatherworld.com/inspi...-stages-3.html The over balancing does not rise the IP so much... JH
(Offline)

28th February 2008, 09:33	#3 (permalink)
ike New Member Current Rebreather/s: RB80 / Clone Other Rebreather/s: RB80 / Clone Join Date: Nov 2007 Location: austria Posts: 12	Re: Apesks DS4 with R190 Injectors Quote: (Originally Posted by jhaaja) Check this out: http://www.rebreatherworld.com/inspi...-stages-3.html The over balancing does not rise the IP so much... JH thx man for this info! So you set your IP to 7.4 right? Ike
(Offline)

28th February 2008, 09:43	#4 (permalink)
jhaaja Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Mar 2005 Location: Finland Posts: 867	Re: Apesks DS4 with R190 Injectors On Inspiration I would have it on surface at 7bar then it should be ~7,4bar at 95m. JH
(Offline)

28th February 2008, 11:46	#5 (permalink)
ike New Member Current Rebreather/s: RB80 / Clone Other Rebreather/s: RB80 / Clone Join Date: Nov 2007 Location: austria Posts: 12	Re: Apesks DS4 with R190 Injectors For OC I have at 9,4 i just scared of the injectors! Anyway will see will adjust to 7,4bar can not be worse! Thanks again!
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode