Cascade cylinder size

diverrob · 29th August 2007, 21:10

I am hoping that someone can help me. I need to know what the wet volume of a large cascade bottle that I have and want to use to drive a booster pump. The numbers on the cyllinder neck are..........

DOT-E 9706-3600/TP5400

REF 324

HC 3600 (on the upper most part of the neck)

If anyone could point me in the right direction I would appreciate it, thanks

Rob

cool_hardware52 · 29th August 2007, 21:22

Quote: (Originally Posted by diverrob)

I am hoping that someone can help me. I need to know what the wet volume of a large cascade bottle that I have and want to use to drive a booster pump. The numbers on the cyllinder neck are..........

DOT-E 9706-3600/TP5400

REF 324

HC 3600 (on the upper most part of the neck)

If anyone could point me in the right direction I would appreciate it, thanks

Rob

Does the bottle have a tare weight stamped on it? If not can you weigh it?

If you know the empty weight and the dimensions you can work out the capacity reasonably closely. Steel is ~495 lbs / cu ft.

Tobin

diverrob · 29th August 2007, 22:29

Quote: (Originally Posted by cool_hardware52)

Does the bottle have a tare weight stamped on it? If not can you weigh it?

If you know the empty weight and the dimensions you can work out the capacity reasonably closely. Steel is ~495 lbs / cu ft.

Tobin

I was going to measure it and figure it out that way but I was hoping that someone would recognize the markings. Thanks

Rob

zmcave · 29th August 2007, 22:58

It might be this:

HC-3600:

SERVICE PRESSURE (PSIG) 3600
LENGTH (INCHES) 51
LENGTH (MILLIMETERS) 1295
DIAMETER (INCHES) 9.25
DIAMETER (MILLIMETERS) 235
EMPTY WEIGHT (POUNDS) 144
EMPTY WEIGHT (KILOGRAMS) 65.3
WATER CAPACITY (CUBIC IN) 2750

Best,
Zé.

29th August 2007, 21:10	#1 (permalink)
diverrob The Evolution of Diving Current Rebreather/s: Evolution Other SCR Other Rebreather/s: Not Bought Yet Other SCR Join Date: May 2005 Location: Victoria BC Canada Posts: 320	Cascade cylinder size I am hoping that someone can help me. I need to know what the wet volume of a large cascade bottle that I have and want to use to drive a booster pump. The numbers on the cyllinder neck are.......... DOT-E 9706-3600/TP5400 REF 324 HC 3600 (on the upper most part of the neck) If anyone could point me in the right direction I would appreciate it, thanks Rob
(Offline)

29th August 2007, 21:22	#2 (permalink)
cool_hardware52 RebreatherWorld Sponsor Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Mar 2005 Location: SoCal USA Posts: 358	Re: Cascade cylinder size Quote: (Originally Posted by diverrob) I am hoping that someone can help me. I need to know what the wet volume of a large cascade bottle that I have and want to use to drive a booster pump. The numbers on the cyllinder neck are.......... DOT-E 9706-3600/TP5400 REF 324 HC 3600 (on the upper most part of the neck) If anyone could point me in the right direction I would appreciate it, thanks Rob Does the bottle have a tare weight stamped on it? If not can you weigh it? If you know the empty weight and the dimensions you can work out the capacity reasonably closely. Steel is ~495 lbs / cu ft. Tobin __________________ www.deepseasupply.com
(Offline)

29th August 2007, 22:29	#3 (permalink)
diverrob The Evolution of Diving Current Rebreather/s: Evolution Other SCR Other Rebreather/s: Not Bought Yet Other SCR Join Date: May 2005 Location: Victoria BC Canada Posts: 320	Re: Cascade cylinder size Quote: (Originally Posted by cool_hardware52) Does the bottle have a tare weight stamped on it? If not can you weigh it? If you know the empty weight and the dimensions you can work out the capacity reasonably closely. Steel is ~495 lbs / cu ft. Tobin I was going to measure it and figure it out that way but I was hoping that someone would recognize the markings. Thanks Rob
(Offline)

29th August 2007, 22:58	#4 (permalink)
zmcave www.rebreather.com.br Current Rebreather/s: Optima Dolphin Other Rebreather/s: Optima Dolphin Join Date: Apr 2006 Location: Brazil Posts: 176	Re: Cascade cylinder size It might be this: HC-3600: SERVICE PRESSURE (PSIG) 3600 LENGTH (INCHES) 51 LENGTH (MILLIMETERS) 1295 DIAMETER (INCHES) 9.25 DIAMETER (MILLIMETERS) 235 EMPTY WEIGHT (POUNDS) 144 EMPTY WEIGHT (KILOGRAMS) 65.3 WATER CAPACITY (CUBIC IN) 2750 Best, Zé.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode