Frog Rebreather

andibk · 7th July 2007, 02:56

I am looking for some data on the Frog Rebreather that is made in California. Could anybody tell me what is the scrubber duration of this Rebreather?
What is the recommended depth limit for the FROG?
Also what is the deepest anyone has heard of this Rebreather being used?

andibk

carcharodon1957 · 7th July 2007, 09:07

Hello,
I don't know if i'm right,

but the FROG that I know is a front o2 reb made by aqualung!
7m and 4 hours diving duration!

Made for army !

I don't know about the other one!
best regards

andibk · 7th July 2007, 09:11

The Frog Rebreather I am refering to is made in California. I have enclosed the website address. I emailed them but I did not get any response.

REBREATHER TECHNOLOGIES, INC

andibk

***caveseeker7*** · 7th July 2007, 10:28

We had a Frog thread going a while back.

Not all that much to write home about, really.

Claimed scrubber duration according to the manufacturer was somewhere
between hilarious and ridiculous. Don't remember exactly how long it was
supposed to be. Maybe Stuart can fill you in, he still owes us the DEMA 05 (!)
report of the Frog. I got their spiel a year before that ...

Pics of my 2004 DEMA coverage (pre-Rebreather World

) are on Janwillem's website, and if I remember
there was an update in the 2005 coverage here in the library, too.

abowie · 7th July 2007, 13:31

These are the guys who "brought" you the Resuscitator Snorkel

Funny as ****!

**rigdiver** · 7th July 2007, 14:07

The Frog was at DEMA 2006. I stopped and chatted with them. They seemed pretty bored. One guy involved is Mark Johnson. He is a pretty sharp engineer that is a consultant for Oceaneering International. His specialty is deep ROV's. He has the knowledge and skills to make it work.

koputai · 7th July 2007, 23:07

Quote: (Originally Posted by andibk)

Could anybody tell me what is the scrubber duration of this Rebreather?

Just going by the one I've pulled apart and measured, the scrubber is only 750 cm^3, which equates to around 1.7 pounds of sorb (1/3 that of the Inspo), and the cross section of the scrubber is 71 cm^2. Might be ok for short, shallow, relaxed dives.

Cheers,
Jason.

7th July 2007, 02:56	#1 (permalink)
andibk New Member Current Rebreather/s: Classic Kiss Dolphin Azimuth Other Rebreather/s: Inspiration Classic Evolution Megalodon Classic Kiss Dolphin Azimuth Join Date: May 2005 Location: Thailand Posts: 146	Frog Rebreather I am looking for some data on the Frog Rebreather that is made in California. Could anybody tell me what is the scrubber duration of this Rebreather? What is the recommended depth limit for the FROG? Also what is the deepest anyone has heard of this Rebreather being used? andibk
(Offline)

7th July 2007, 09:07	#2 (permalink)
carcharodon1957 New Member Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Oct 2006 Location: switzerland Posts: 69	Re: Frog Rebreather Hello, I don't know if i'm right, but the FROG that I know is a front o2 reb made by aqualung! 7m and 4 hours diving duration! Made for army ! I don't know about the other one! best regards
(Offline)

7th July 2007, 09:11	#3 (permalink)
andibk New Member Current Rebreather/s: Classic Kiss Dolphin Azimuth Other Rebreather/s: Inspiration Classic Evolution Megalodon Classic Kiss Dolphin Azimuth Join Date: May 2005 Location: Thailand Posts: 146	Re: Frog Rebreather The Frog Rebreather I am refering to is made in California. I have enclosed the website address. I emailed them but I did not get any response. REBREATHER TECHNOLOGIES, INC andibk
(Offline)

7th July 2007, 10:28	#4 (permalink)
*caveseeker7* Who loves ya, baby Current Rebreather/s: Sport Kiss Other Rebreather/s: Prism Topaz Join Date: Jan 2005 Location: Too far from Neverland Posts: 5,281	Re: Frog Rebreather We had a Frog thread going a while back. Not all that much to write home about, really. Claimed scrubber duration according to the manufacturer was somewhere between hilarious and ridiculous. Don't remember exactly how long it was supposed to be. Maybe Stuart can fill you in, he still owes us the DEMA 05 (!) report of the Frog. I got their spiel a year before that ... Pics of my 2004 DEMA coverage (pre-Rebreather World ) are on Janwillem's website, and if I remember there was an update in the 2005 coverage here in the library, too. __________________ Cheers Stefan Be Water, My Friend - Bruce Lee Sponsor Lou in Race For Life!
(Offline)

7th July 2007, 13:31	#5 (permalink)
abowie Fighting Girl Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: May 2005 Location: Land of Oz Posts: 573	Re: Frog Rebreather These are the guys who "brought" you the Resuscitator Snorkel Funny as ****! __________________ Andrew Bowie Rebreather-friendly Buddy
(Offline)

7th July 2007, 14:07	#6 (permalink)
rigdiver LEARNING CONTINUALLY Current Rebreather/s: Inspiration Classic Other Rebreather/s: Megalodon Join Date: Mar 2005 Location: TEXAS Posts: 405	Re: Frog Rebreather The Frog was at DEMA 2006. I stopped and chatted with them. They seemed pretty bored. One guy involved is Mark Johnson. He is a pretty sharp engineer that is a consultant for Oceaneering International. His specialty is deep ROV's. He has the knowledge and skills to make it work.
(Offline)

7th July 2007, 23:07	#7 (permalink)
koputai Subsea Systems Current Rebreather/s: MK 15.X Other CCR Other SCR Other Rebreather/s: Not Bought Yet Other CCR Other SCR Join Date: Jul 2005 Location: Sydney, Australia Posts: 299	Re: Frog Rebreather Quote: (Originally Posted by andibk) Could anybody tell me what is the scrubber duration of this Rebreather? Just going by the one I've pulled apart and measured, the scrubber is only 750 cm^3, which equates to around 1.7 pounds of sorb (1/3 that of the Inspo), and the cross section of the scrubber is 71 cm^2. Might be ok for short, shallow, relaxed dives. Cheers, Jason.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode