No Dema infos , yet

Jens Peter Kock · 12th November 2006, 11:24

There are a lot of useded rebreathers and parts for sale after the dema
do these people have more info´s ?
didn´t see infos about new rebreathers until now
would like to hear more esp. rebreathers done with the open revolution design
any news from poseidon / cis-lunar ?
thanks jp

Faceless · 12th November 2006, 11:54

I second for DeepLife info.
With all this info a & promises to show smth really new at DEMA and total silence after it ???

No Apeks 3 for Meg ...

So what was DEMA 2006 in terms of new equipment then; just a rambling around old or slightly "redecorated" Rebreather models ?

***schford*** · 12th November 2006, 13:09

We got video footage and interviews about everything to do with rebreathers :-)

Will just trickle in over time - I know the guys spent some deep with Alex but every time I went over he was being swamped - it son video though...

Biggest Rebreather news for me was how successfull the Titan launch was they sold a stack!

Also got some good footage of the new OMS Rebreather in protype form...

***diverklondike*** · 12th November 2006, 13:22

Gang,

Take a deeeeeeeep breath and just calm down. DEMA has been over for less than 15 hours. There were lots and lots of rebreathers everywhere. I will be posting pictures in the next day or so...

Dive Safe

Mark

Faceless · 12th November 2006, 13:27

Oh, that greatly changes things.

Will wait impatiently for the footage

Once again Stuart, I'm pretty sure thay you did your best there, as usually. You da man

You see, last year i've started to think about shifting to CCR.
But after careful review of the market, i've felt gross, because i've dealt with safety equipment manufacturing some time ago, and i didn't found even a slighthest sample of safety review for any CCR rebreather.
(Forex: using Pentium CPU in eCCR instead of FPGA, like Titan CCR does ???
Thanks, move along guys)

Then i've came across O.R. rebreather docs, and these magic words "HAZOP" "FMECA reports" and CASS registration were like a lightiing strike.
Just hearing these words, it's like a honey to my engineering soul.

At last man with a right approach has appeared at the life support equipment development.

2stoned · 12th November 2006, 15:46

looking forward to read some write ups from the DEMA show.

Will try to be patient... Since I could not be there myself, I am very curious.

With the general quality, insight and knowledge that is presented here;
I know that we will be in for a real treat!

Waiting....waiting...waiting...oh well....

RonMicjan · 12th November 2006, 23:01

Quote: (Originally Posted by Faceless)

(Forex: using Pentium CPU in eCCR instead of FPGA, like Titan CCR does ???
Thanks, move along guys)

.

Huh?, no pentium cpu there, the titan uses shearwater electronics for setpoint and deco. bubbleseekers was building a PC for underwater use but it wasnt shown at dema, just the CCR and the lights.

Genesis · 13th November 2006, 03:17

I've got six tapes dumping right now to disk for editing. Some other footage is in an unknown state of access, but we believe it will be able to get here, and I've got one tape that may be unreadable due to alignment issues with the shooters cam (if so, that's unfixable here - but this is PRELIMINARY. I haven't given up on that one yet.)

Since I have to sit here and WATCH the captures off the media, I can tell you that there are EXTENSIVE interviews and footage of a whole bunch of rebreathers on those tapes, including the DeepLife components.

Be patient folks - the "de-junking" process, which is the first part of editing, is going to take some time, and THEN it has to be actually edited and put together into something useful. To put this in perspective there is over six hours of raw footage here (assuming all the tapes are actually full) and it has to be all watched many more times than once to do this job.....

Faceless · 13th November 2006, 05:18

Quote: (Originally Posted by RonMicjan)

Huh?, no pentium cpu there, the titan uses shearwater electronics for setpoint and deco. bubbleseekers was building a PC for underwater use but it wasnt shown at dema, just the CCR and the lights.

Oh, then they do have changed their mind after all.
Good for them, I do apologize for my stupidity.

**DeepBlueInnovation** · 14th November 2006, 01:13

Quote: (Originally Posted by Faceless)

Oh, then they do have changed their mind after all.
Good for them, I do apologize for my stupidity.

My understanding was that it was to be a secondary dive computer and not a primary monitoring device; similar to a VR3. As a codemonkey i wouldn't rely on an Intel processor for life support as you point out, however it would be good to have a dive computer as a secondary (or third

) that made deco a little less boring. So, I for one look forward to the release of the computer and am keen to learn more about it.

12th November 2006, 11:24	#1 (permalink)
Jens Peter Kock New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Nov 2005 Location: northern germany Posts: 1	No Dema infos , yet There are a lot of useded rebreathers and parts for sale after the dema do these people have more info´s ? didn´t see infos about new rebreathers until now would like to hear more esp. rebreathers done with the open revolution design any news from poseidon / cis-lunar ? thanks jp
(Offline)

12th November 2006, 11:54	#2 (permalink)
Faceless New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: May 2006 Location: France, Montpellier Posts: 88	Re: No Dema infos , yet I second for DeepLife info. With all this info a & promises to show smth really new at DEMA and total silence after it ??? No Apeks 3 for Meg ... So what was DEMA 2006 in terms of new equipment then; just a rambling around old or slightly "redecorated" Rebreather models ?
(Offline)

12th November 2006, 13:09	#3 (permalink)
*schford* Despotic Overlord Current Rebreather/s: Megalodon Sport Kiss Other Rebreather/s: Join Date: Jan 2005 Location: London, UK Posts: 3,662	Re: No Dema infos , yet We got video footage and interviews about everything to do with rebreathers :-) Will just trickle in over time - I know the guys spent some deep with Alex but every time I went over he was being swamped - it son video though... Biggest Rebreather news for me was how successfull the Titan launch was they sold a stack! Also got some good footage of the new OMS Rebreather in protype form... __________________ Bailout and Kit Management account for Murphy's Law The only bad question is one you did not ask and later wish you had. Use of Rebreather World is subject to the Rebreather World Terms & Conditions of Use
(Offline)

12th November 2006, 13:22	#4 (permalink)
*diverklondike* Moderator Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Inspiration Classic Other CCR Join Date: Oct 2005 Location: Delaware, USA Posts: 1,463	Re: No Dema infos , yet Gang, Take a deeeeeeeep breath and just calm down. DEMA has been over for less than 15 hours. There were lots and lots of rebreathers everywhere. I will be posting pictures in the next day or so... Dive Safe Mark
(Online)

12th November 2006, 13:27	#5 (permalink)
Faceless New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: May 2006 Location: France, Montpellier Posts: 88	Re: No Dema infos , yet Oh, that greatly changes things. Will wait impatiently for the footage Once again Stuart, I'm pretty sure thay you did your best there, as usually. You da man You see, last year i've started to think about shifting to CCR. But after careful review of the market, i've felt gross, because i've dealt with safety equipment manufacturing some time ago, and i didn't found even a slighthest sample of safety review for any CCR rebreather. (Forex: using Pentium CPU in eCCR instead of FPGA, like Titan CCR does ??? Thanks, move along guys) Then i've came across O.R. rebreather docs, and these magic words "HAZOP" "FMECA reports" and CASS registration were like a lightiing strike. Just hearing these words, it's like a honey to my engineering soul. At last man with a right approach has appeared at the life support equipment development.
(Offline)

12th November 2006, 15:46	#6 (permalink)
2stoned Such is my point of view Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Oct 2005 Location: Denmark Posts: 77	Re: No Dema infos , yet looking forward to read some write ups from the DEMA show. Will try to be patient... Since I could not be there myself, I am very curious. With the general quality, insight and knowledge that is presented here; I know that we will be in for a real treat! Waiting....waiting...waiting...oh well.... __________________ Sten. The only man that always had all his work done by Friday, was Robinson Crusoe! www.rebreatherworld.com - Is going down in silence - Staying longer in stealth and style - Diving first class, all the way!
(Offline)

12th November 2006, 23:01	#7 (permalink)
RonMicjan Cap Ron scourge of the NW Current Rebreather/s: Megalodon Dolphin Home Build Other Rebreather/s: Sport Kiss Classic Kiss Dolphin Home Build Join Date: Feb 2005 Location: Cape Disapointment, The Graveyard of the Pacific Posts: 1,082	Re: No Dema infos , yet Quote: (Originally Posted by Faceless) (Forex: using Pentium CPU in eCCR instead of FPGA, like Titan CCR does ??? Thanks, move along guys) . Huh?, no pentium cpu there, the titan uses shearwater electronics for setpoint and deco. bubbleseekers was building a PC for underwater use but it wasnt shown at dema, just the CCR and the lights. __________________ Ron "Life is pain princess, anyone who tells you different, is selling something", The Dread Pirate Wesley. www.tmishop.com Diving bits etc.
(Offline)

13th November 2006, 03:17	#8 (permalink)
Genesis Bubbless Box of Death Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Oct 2005 Location: Sunny Florida Posts: 1,394	Re: No Dema infos , yet I've got six tapes dumping right now to disk for editing. Some other footage is in an unknown state of access, but we believe it will be able to get here, and I've got one tape that may be unreadable due to alignment issues with the shooters cam (if so, that's unfixable here - but this is PRELIMINARY. I haven't given up on that one yet.) Since I have to sit here and WATCH the captures off the media, I can tell you that there are EXTENSIVE interviews and footage of a whole bunch of rebreathers on those tapes, including the DeepLife components. Be patient folks - the "de-junking" process, which is the first part of editing, is going to take some time, and THEN it has to be actually edited and put together into something useful. To put this in perspective there is over six hours of raw footage here (assuming all the tapes are actually full) and it has to be all watched many more times than once to do this job..... __________________ "A venturesome minority will always be eager to get off on their own, and no obstacles should be placed in their path; let them take risks for Godsake, let them get lost, sunburnt, stranded, drowned, eaten by bears, buried alive under avalanches - that is the right and privilege of any free American." http://www.denninger.net http://www.diversunion.org/liability.htm - Fix the Diving Cert racket
(Offline)

13th November 2006, 05:18	#9 (permalink)
Faceless New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: May 2006 Location: France, Montpellier Posts: 88	Re: No Dema infos , yet Quote: (Originally Posted by RonMicjan) Huh?, no pentium cpu there, the titan uses shearwater electronics for setpoint and deco. bubbleseekers was building a PC for underwater use but it wasnt shown at dema, just the CCR and the lights. Oh, then they do have changed their mind after all. Good for them, I do apologize for my stupidity. __________________ Peoples risk perception is almost always focused on the most dramatic rather than the most probable. (c) Gordon Smith
(Offline)

14th November 2006, 01:13	#10 (permalink)
DeepBlueInnovation Prism #007 Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Sep 2005 Location: Perth, Western Australia Posts: 314	Re: No Dema infos , yet Quote: (Originally Posted by Faceless) Oh, then they do have changed their mind after all. Good for them, I do apologize for my stupidity. My understanding was that it was to be a secondary dive computer and not a primary monitoring device; similar to a VR3. As a codemonkey i wouldn't rely on an Intel processor for life support as you point out, however it would be good to have a dive computer as a secondary (or third ) that made deco a little less boring. So, I for one look forward to the release of the computer and am keen to learn more about it.
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode