Conversation Between cool_hardware52 and jasace

1 Visitor Messages

  1. Hi Tobin,

    Are you interested in providing me a quote to make some PSCR switch blocks. I have full AutoCAD drawings of course. They are just too expensive to have made here in Australia and a number of members have contacted me asking if I'd be prepared to make a few.

    Initially a quantity of ten units, if you could provide a price with and without the valves and fittings, I'd appreciate it.

    Here is a link to some pictures of the one I had made here in Australia:
    http://www.rebreatherworld.com/pscr-...itchblock.html

    The Valves are Swagelok SS-4P4T for the green one and SS-4P4T-RD for
    the red one. New o-rings for the valves are 012 and 3-902 EPDM or Viton
    in 90 duro. Quick connects are SS-QC6-B-4PM. To assemble it, you need
    to use Stainless teflon tape, which is silver in colour.

    You can contact me at divingtactics@gmail.com if you need anything else.

    Thanks,

    Jason Caldwell
Showing Visitor Messages 1 to 1 of 1