Draeger Hand pump parts

LukeN · 30th December 2012, 11:49

We have a old drager hand 02 pump and they wear through the shaft seals on the main piston.

I have the part number but draeger cant find it... Does anyone know if the parts are still available?

RGMag · 30th December 2012, 21:44

hi, could you post a pic of the part you need with dimensions? I have some u300 parts and that may interchange with yours!

LukeN · 31st December 2012, 00:22

Sorry someone else has it at present...

but it is PN# UO 1760 slotted sleeve.

It is the shaft seal ( that wears out...)on the moving piston/ Ram that goes under the Cones that gets lubricated with Glycerine.

RGMag · 7th January 2013, 18:10

this is what I have! These are the piston seals, at least another guy on this forum asked me for them and provided pic´s of his part, these is what he showed to me and the only part I have for this type of pump.

I have some of these, first come first served!

RGMag · 7th January 2013, 18:15

this is how they are installed! They also come with the o-ring!

wizbang · 7th January 2013, 21:34

Hi Luke, Mark Wagstaff in Melbourne had mine rebuilt with new non-OEM seals before I bought it.
Worth an email as well.
Wiz
PS Why dont you just pay for a gym membership instead

LukeN · 8th January 2013, 09:38

PM sent.

Snusmumrik · 9th January 2013, 09:35

New piston seals can be made of delryn or some other similar plastic.
In such way we revive russian O2 hand pump KN-3. We can discuss this
here, or by PM

30th December 2012, 11:49	#1 (permalink)
LukeN New Member Join Date: Jun 2005 Location: Australia,West Aus Posts: 97	Draeger Hand pump parts We have a old drager hand 02 pump and they wear through the shaft seals on the main piston. I have the part number but draeger cant find it... Does anyone know if the parts are still available?
(Offline)

30th December 2012, 21:44	#2 (permalink)
RGMag LAR Addict LAR VI FGT LAR VI Clone OMG MK4 CDV Join Date: Sep 2008 Location: Germany Posts: 721	Re: Draeger Hand pump parts hi, could you post a pic of the part you need with dimensions? I have some u300 parts and that may interchange with yours!
(Offline)

31st December 2012, 00:22	#3 (permalink)
LukeN New Member Join Date: Jun 2005 Location: Australia,West Aus Posts: 97	Re: Draeger Hand pump parts Sorry someone else has it at present... but it is PN# UO 1760 slotted sleeve. It is the shaft seal ( that wears out...)on the moving piston/ Ram that goes under the Cones that gets lubricated with Glycerine.
(Offline)

7th January 2013, 21:34	#6 (permalink)
wizbang WEB MERMEN Inspiration & CCR KISS Dolphin Prism,rEVO,Mk15.5,KISS,Hmblds Join Date: Feb 2005 Location: Perth Australia Posts: 427	Re: Draeger Hand pump parts Hi Luke, Mark Wagstaff in Melbourne had mine rebuilt with new non-OEM seals before I bought it. Worth an email as well. Wiz PS Why dont you just pay for a gym membership instead
(Offline)

8th January 2013, 09:38	#7 (permalink)
LukeN New Member Join Date: Jun 2005 Location: Australia,West Aus Posts: 97	Re: Draeger Hand pump parts PM sent.
(Offline)

9th January 2013, 09:35	#8 (permalink)
Snusmumrik RBW Member IDA-71(KISS Mod) IDA-59(O2 Mod), IDA-72 Join Date: Nov 2008 Location: St.Petersburg, Russia Posts: 130	Re: Draeger Hand pump parts New piston seals can be made of delryn or some other similar plastic. In such way we revive russian O2 hand pump KN-3. We can discuss this here, or by PM
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode