agt 7/30

LukeN · 27th May 2008, 12:18

Does any one out there have a parts manual for a AGT 7/30 Model #52065?

USSMEG · 27th May 2008, 12:20

I believe I do and can look when I get home. I think its all PDF and I can email it right to you. Ping me here to remind me
USSDPV@Juno.com

Paul

kiwidiver · 27th May 2008, 19:44

Luke any time I needed parts haskel aust would email through schematics and rebuild kit numbers etc.Try col at colkan for parts alot cheaper than haskel australia.

LukeN · 29th May 2008, 00:11

Thanks Paul for the pdf they worked a treat and Kiwidiver for the buying tips.

LukeN · 3rd June 2008, 03:27

Ok I changed a few parts out. Changed all orings on the spool and barrel, and replaced the pilot valves and orings. its still broken! The unit costatly vents drive gas out of the exhaust muffler. When you turn it on the spool cycles out and then goes in and out the exhaust with out popping back out. Does anyone have any ideas? thanks Luke

kiwidiver · 3rd June 2008, 05:31

haskel made some changes to the pilot valves some can be adjusted in length some cant.To me it sounds like they are not being pushed back by the lp piston.I had a similar problem and lathed some new ones slightly longer(1.5mm).Check that the hp piston is not bottoming out on the check valve.

USSMEG · 3rd June 2008, 10:28

Post a picture of it, and one of the pilot valve. Then I may have some ideas as to whats wrong.
Later Paul

LukeN · 5th June 2008, 01:12

OK checked those. The shorter one of the 2, the new one is about 1mm longer, the long one is the same legth as the old one which worked fine for 3 years.

Quote: (Originally Posted by kiwidiver)

haskel made some changes to the pilot valves some can be adjusted in length some cant.To me it sounds like they are not being pushed back by the lp piston.I had a similar problem and lathed some new ones slightly longer(1.5mm).Check that the hp piston is not bottoming out on the check valve.

HighPressureTech · 18th June 2008, 06:42

If you are srill struggling, let us know. We are all ex-Haskel people here including there top Service technician. we are now Maxpro/Maximator distributors but we service, repair, O2 claen and supply Refurbished Haskel Boosters every week.

Be pleased to assist in any way.

Peter
High Pressure Technologies

LukeN · 29th June 2008, 12:31

I don't suppose any one has the oring size for the air spool do they? I think I have the right ones but unless I have to I don't want to buy haskel orings

27th May 2008, 12:18	#1 (permalink)
LukeN New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Prism Topaz Join Date: Jun 2005 Location: Australia,West Aus Posts: 82	agt 7/30 Does any one out there have a parts manual for a AGT 7/30 Model #52065? __________________ Luke Nelson www.imagedive.com.au
(Offline)

27th May 2008, 12:20	#2 (permalink)
USSMEG USSMEG Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Mar 2005 Location: Mass Posts: 276	Re: agt 7/30 I believe I do and can look when I get home. I think its all PDF and I can email it right to you. Ping me here to remind me USSDPV@Juno.com Paul
(Offline)

27th May 2008, 19:44	#3 (permalink)
kiwidiver Custom Title Allowed! Current Rebreather/s: Inspiration Classic Inspiration Vision Azimuth Home Build Other Rebreather/s: Azimuth Home Build Join Date: Jul 2005 Location: new zealand Posts: 129	Re: agt 7/30 Luke any time I needed parts haskel aust would email through schematics and rebuild kit numbers etc.Try col at colkan for parts alot cheaper than haskel australia.
(Offline)

29th May 2008, 00:11	#4 (permalink)
LukeN New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Prism Topaz Join Date: Jun 2005 Location: Australia,West Aus Posts: 82	Re: agt 7/30 Thanks Paul for the pdf they worked a treat and Kiwidiver for the buying tips. __________________ Luke Nelson www.imagedive.com.au
(Offline)

3rd June 2008, 03:27	#5 (permalink)
LukeN New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Prism Topaz Join Date: Jun 2005 Location: Australia,West Aus Posts: 82	Re: agt 7/30 issues Ok I changed a few parts out. Changed all orings on the spool and barrel, and replaced the pilot valves and orings. its still broken! The unit costatly vents drive gas out of the exhaust muffler. When you turn it on the spool cycles out and then goes in and out the exhaust with out popping back out. Does anyone have any ideas? thanks Luke __________________ Luke Nelson www.imagedive.com.au Last edited by LukeN : 3rd June 2008 at 04:04. Reason: spelling
(Offline)

3rd June 2008, 05:31	#6 (permalink)
kiwidiver Custom Title Allowed! Current Rebreather/s: Inspiration Classic Inspiration Vision Azimuth Home Build Other Rebreather/s: Azimuth Home Build Join Date: Jul 2005 Location: new zealand Posts: 129	Re: agt 7/30 haskel made some changes to the pilot valves some can be adjusted in length some cant.To me it sounds like they are not being pushed back by the lp piston.I had a similar problem and lathed some new ones slightly longer(1.5mm).Check that the hp piston is not bottoming out on the check valve.
(Offline)

3rd June 2008, 10:28	#7 (permalink)
USSMEG USSMEG Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Mar 2005 Location: Mass Posts: 276	Re: agt 7/30 Post a picture of it, and one of the pilot valve. Then I may have some ideas as to whats wrong. Later Paul
(Offline)

5th June 2008, 01:12	#8 (permalink)
LukeN New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Prism Topaz Join Date: Jun 2005 Location: Australia,West Aus Posts: 82	Re: agt 7/30 OK checked those. The shorter one of the 2, the new one is about 1mm longer, the long one is the same legth as the old one which worked fine for 3 years. Quote: (Originally Posted by kiwidiver) haskel made some changes to the pilot valves some can be adjusted in length some cant.To me it sounds like they are not being pushed back by the lp piston.I had a similar problem and lathed some new ones slightly longer(1.5mm).Check that the hp piston is not bottoming out on the check valve. __________________ Luke Nelson www.imagedive.com.au
(Offline)

18th June 2008, 06:42	#9 (permalink)
HighPressureTech New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Apr 2008 Location: Los Angeles Posts: 8	Re: agt 7/30 If you are srill struggling, let us know. We are all ex-Haskel people here including there top Service technician. we are now Maxpro/Maximator distributors but we service, repair, O2 claen and supply Refurbished Haskel Boosters every week. Be pleased to assist in any way. Peter High Pressure Technologies
(Offline)

29th June 2008, 12:31	#10 (permalink)
LukeN New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Prism Topaz Join Date: Jun 2005 Location: Australia,West Aus Posts: 82	Re: agt 7/30 I don't suppose any one has the oring size for the air spool do they? I think I have the right ones but unless I have to I don't want to buy haskel orings __________________ Luke Nelson www.imagedive.com.au
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.rebreatherworld.com/compressors-blending-mixing-and-booster-pumps/19487-agt-7-30-a.html
Posted By	For	Type	Date
compressors: Blogs, Photos, Videos and more on Technorati	This thread	Refback	10th July 2008 18:50
Rebreather world \| X-Ray International Dive Magazine	This thread	Refback	28th May 2008 00:50