Jetsam - Flow Back Problems

CCR900 · 14th February 2008, 07:02

Wonder if someone could help me with this issue. When Jetsam Baby Booster is plugged into HP O2, but not pumping, the O2 on the O side creeps back through the pump out of the I inlet and back into the source tank (when there is a pressure differential ofcourse).

I stripped the head and cleaned the O rings and silver disk but creep still goes on, its very slow but irritating all the same.

It may just needs a service kit, if so, if anyone can tell me where I can source one? Preferable somewhere where I can pay by VISA.

Thanks

Fil

pabusk · 14th February 2008, 07:17

Quote: (Originally Posted by CCR900)

Wonder if someone could help me with this issue. When Jetsam Baby Booster is plugged into HP O2, but not pumping, the O2 on the O side creeps back through the pump out of the I inlet and back into the source tank (when there is a pressure differential ofcourse).

I stripped the head and cleaned the O rings and silver disk but creep still goes on, its very slow but irritating all the same.

It may just needs a service kit, if so, if anyone can tell me where I can source one? Preferable somewhere where I can pay by VISA.

Thanks

Fil

Just sent an email to Jetsam, they have the service kits. Last time I ordered one it was $50.

Cheers,
Paul

CCR900 · 14th February 2008, 10:42

Thanks.

Fil

mdsourou · 14th February 2008, 12:27

Hi Fill
The problem its probably the one way valve. It needs changing
Cheers

14th February 2008, 07:02	#1 (permalink)
CCR900 Custom Title Allowed! Current Rebreather/s: Ouroboros Other Rebreather/s: Inspiration Classic Inspiration Vision Join Date: Nov 2005 Location: England Posts: 332	Jetsam - Flow Back Problems Wonder if someone could help me with this issue. When Jetsam Baby Booster is plugged into HP O2, but not pumping, the O2 on the O side creeps back through the pump out of the I inlet and back into the source tank (when there is a pressure differential ofcourse). I stripped the head and cleaned the O rings and silver disk but creep still goes on, its very slow but irritating all the same. It may just needs a service kit, if so, if anyone can tell me where I can source one? Preferable somewhere where I can pay by VISA. Thanks Fil
(Offline)

14th February 2008, 07:17	#2 (permalink)
pabusk Custom Title Allowed! Current Rebreather/s: Inspiration Vision Other Rebreather/s: Not Bought Yet Inspiration Classic Join Date: Dec 2005 Location: Holland Posts: 131	Re: Jetsam - Flow Back Problems Quote: (Originally Posted by CCR900) Wonder if someone could help me with this issue. When Jetsam Baby Booster is plugged into HP O2, but not pumping, the O2 on the O side creeps back through the pump out of the I inlet and back into the source tank (when there is a pressure differential ofcourse). I stripped the head and cleaned the O rings and silver disk but creep still goes on, its very slow but irritating all the same. It may just needs a service kit, if so, if anyone can tell me where I can source one? Preferable somewhere where I can pay by VISA. Thanks Fil Just sent an email to Jetsam, they have the service kits. Last time I ordered one it was $50. Cheers, Paul
(Offline)

14th February 2008, 10:42	#3 (permalink)
CCR900 Custom Title Allowed! Current Rebreather/s: Ouroboros Other Rebreather/s: Inspiration Classic Inspiration Vision Join Date: Nov 2005 Location: England Posts: 332	Re: Jetsam - Flow Back Problems Thanks. Fil
(Offline)

14th February 2008, 12:27	#4 (permalink)
mdsourou New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Mar 2007 Location: Cyprus Posts: 46	Re: Jetsam - Flow Back Problems Hi Fill The problem its probably the one way valve. It needs changing Cheers
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.rebreatherworld.com/compressors-blending-mixing-and-booster-pumps/17311-jetsam-flow-back-problems.html
Posted By	For	Type	Date
Compressors, Blending / Mixing and Booster Pumps [Archive] - Rebreather World	This thread	Refback	29th February 2008 20:01