RS Part no for Molex connectors for R22 BUD cell

louisrankin · 13th January 2006, 09:25

Does anyone know the RS part no for Molex connector for the R22 BUD or R22 Cell. I need to replace one connector for my kiss and home made VR3 lead. I know the molex 4809 crimp terminal type 08-55-0111 but I cannot find them on the RS web site.

Thanks

Louis

***jradomski*** · 13th January 2006, 09:45

Quote: (Originally Posted by louisrankin)

Does anyone know the RS part no for Molex connector for the R22 BUD or R22 Cell. I need to replace one connector for my kiss and home made VR3 lead. I know the molex 4809 crimp terminal type 08-55-0111 but I cannot find them on the RS web site.

Thanks

Louis

see this post in the KISS forum for the official molex part numbers..
The KiSS uses the same connector for its R22s and Sport

http://www.rebreatherworld.com/24789-post2.html

Yours is not one of them..

louisrankin · 13th January 2006, 11:28

Quote:

You should be using Molex KK series .100 connectors

22-30 guage
ok
08-50-0114 brass / tin
08-52-0123 phosophor bronze / tin
better
08-55-0102 brass / select gold
08-65-0816 phosophor bronze / select gold
best
08-56-0110 brass / gold
08-65-0814 phosophor bronze / gold

housing
Molex 3 pin connector P/N 22-01-3037 or 22-01-2037

Thanks Joe,

But I still cannot find them on the RS web site does anybody know where I can get hold of some in the UK

lizardland · 13th January 2006, 12:07

I got mine from Rapid Electronics. Can't remember the part number but if you search their connectors page you'll find them. www.rapidelec.co.uk

If you get stuck then you can use modified disk drive connectors from Maplin. They have 4 sockets rather than 3 but you can chop the extra one off with a stanley knife.

Pierre Farrugia · 13th January 2006, 17:50

Quote: (Originally Posted by lizardland)

I got mine from Rapid Electronics. Can't remember the part number but if you search their connectors page you'll find them. www.rapidelec.co.uk

If you get stuck then you can use modified disk drive connectors from Maplin. They have 4 sockets rather than 3 but you can chop the extra one off with a stanley knife.

Has anyone tried to contact ADP for them as I just did and they are happy to supply them. As mine is still under warrenty I will get them for free! What did you pay for them?

lizardland · 15th January 2006, 22:19

They are 5p each so about 3 cents each. I just checked the Rapid site as I need some spares and they are out of stock. They are not made by Molex but I've been using them on my KISS since May with no problem and I've used them on my homebuilds too.

13th January 2006, 09:25	#1 (permalink)
louisrankin Póg mo thóin Current Rebreather/s: Megalodon Other Rebreather/s: Sport Kiss Classic Kiss Join Date: May 2005 Location: Cambridge Posts: 303	RS Part no for Molex connectors for R22 BUD cell Does anyone know the RS part no for Molex connector for the R22 BUD or R22 Cell. I need to replace one connector for my kiss and home made VR3 lead. I know the molex 4809 crimp terminal type 08-55-0111 but I cannot find them on the RS web site. Thanks Louis
(Offline)

13th January 2006, 09:45	#2 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Home Build Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Home Build Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,015	Re: RS Part no for Molex connectors for R22 BUD cell Quote: (Originally Posted by louisrankin) Does anyone know the RS part no for Molex connector for the R22 BUD or R22 Cell. I need to replace one connector for my kiss and home made VR3 lead. I know the molex 4809 crimp terminal type 08-55-0111 but I cannot find them on the RS web site. Thanks Louis see this post in the KISS forum for the official molex part numbers.. The KiSS uses the same connector for its R22s and Sport http://www.rebreatherworld.com/24789-post2.html Yours is not one of them.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated. Last edited by jradomski : 13th January 2006 at 09:47.
(Offline)

13th January 2006, 11:28	#3 (permalink)
louisrankin Póg mo thóin Current Rebreather/s: Megalodon Other Rebreather/s: Sport Kiss Classic Kiss Join Date: May 2005 Location: Cambridge Posts: 303	Re: RS Part no for Molex connectors for R22 BUD cell Quote: You should be using Molex KK series .100 connectors 22-30 guage ok 08-50-0114 brass / tin 08-52-0123 phosophor bronze / tin better 08-55-0102 brass / select gold 08-65-0816 phosophor bronze / select gold best 08-56-0110 brass / gold 08-65-0814 phosophor bronze / gold housing Molex 3 pin connector P/N 22-01-3037 or 22-01-2037 Thanks Joe, But I still cannot find them on the RS web site does anybody know where I can get hold of some in the UK
(Offline)

13th January 2006, 12:07	#4 (permalink)
lizardland Yak Current Rebreather/s: MK 15.X Home Build Other Rebreather/s: Classic Kiss Home Build Join Date: Mar 2005 Location: North... Posts: 1,305	Re: RS Part no for Molex connectors for R22 BUD cell I got mine from Rapid Electronics. Can't remember the part number but if you search their connectors page you'll find them. www.rapidelec.co.uk If you get stuck then you can use modified disk drive connectors from Maplin. They have 4 sockets rather than 3 but you can chop the extra one off with a stanley knife. __________________ Can you imagine drifting along in the sea with your mouth open and a load of f***ing plankton going in? You'd like it, would you? www.westons-cider.co.uk Azerbaijani Association of Technical Divers Publicity Officer and Goat Wrangler
(Offline)

13th January 2006, 17:50	#5 (permalink)
Pierre Farrugia Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: Malta Posts: 636	Re: RS Part no for Molex connectors for R22 BUD cell Quote: (Originally Posted by lizardland) I got mine from Rapid Electronics. Can't remember the part number but if you search their connectors page you'll find them. www.rapidelec.co.uk If you get stuck then you can use modified disk drive connectors from Maplin. They have 4 sockets rather than 3 but you can chop the extra one off with a stanley knife. Has anyone tried to contact ADP for them as I just did and they are happy to supply them. As mine is still under warrenty I will get them for free! What did you pay for them? __________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" www.atlam.org www.divemed.com
(Offline)

15th January 2006, 22:19	#6 (permalink)
lizardland Yak Current Rebreather/s: MK 15.X Home Build Other Rebreather/s: Classic Kiss Home Build Join Date: Mar 2005 Location: North... Posts: 1,305	Re: RS Part no for Molex connectors for R22 BUD cell They are 5p each so about 3 cents each. I just checked the Rapid site as I need some spares and they are out of stock. They are not made by Molex but I've been using them on my KISS since May with no problem and I've used them on my homebuilds too. __________________ Can you imagine drifting along in the sea with your mouth open and a load of f***ing plankton going in? You'd like it, would you? www.westons-cider.co.uk Azerbaijani Association of Technical Divers Publicity Officer and Goat Wrangler
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode