Golem Inspo BOV onto Meg Hoses

jkaterenchuk · 11th May 2008, 11:58

I originally purchased a Golem Threaded BOV for the inspiration. When I got the Kiss Classic I simply bought the attachements that slid into the Kiss hoses and were secured with the hose clamps. They have a screw nut on the ends that screw onto the threaded BOV.

Here is a pic of the threaded BOV Rebreather BOV - DSV/OC - Threaded

Here is a pic of the adapters to make it work with the Kiss Golem Gear, Inc. - Conversion kit for Inspiration threaded Golem BOV

Now that I have a Meg I am looking for a way to use this same setup on the Meg. Any ideas how I might make this work?

I may need to change the hoses on the Meg such that the end closest to the DSV is the same inside diameter as the Kiss hose. Currently the Meg hose is flared out to a bigger diameter so that it can slide over the Meg DSV. Does anyone have or know where I might obtain hoses that might fit?

John

lof · 12th May 2008, 00:44

That is what I did.
I just found some hoses that fit both the Meg T-pieces and threaded Golem BOV.

jkaterenchuk · 12th May 2008, 01:11

Quote: (Originally Posted by lof)

That is what I did.
I just found some hoses that fit both the Meg T-pieces and threaded Golem BOV.

Thanks, where might I find the same hoses?

john

Lancer4545 · 12th May 2008, 07:47

Quote: (Originally Posted by jkaterenchuk)

Now that I have a Meg I am looking for a way to use this same setup on the Meg. Any ideas how I might make this work?

Hey John,

Does this mean you'll be bringing the new baby to Coron ?

Lance

jkaterenchuk · 12th May 2008, 13:28

Quote: (Originally Posted by Lancer4545)

Hey John,

Does this mean you'll be bringing the new baby to Coron ?

Lance

Thats the plan at the moment.

John

11th May 2008, 11:58	#1 (permalink)
jkaterenchuk . Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Other Rebreather/s: Join Date: May 2006 Location: Lititz, PA Posts: 559	Golem Inspo BOV onto Meg Hoses I originally purchased a Golem Threaded BOV for the inspiration. When I got the Kiss Classic I simply bought the attachements that slid into the Kiss hoses and were secured with the hose clamps. They have a screw nut on the ends that screw onto the threaded BOV. Here is a pic of the threaded BOV Rebreather BOV - DSV/OC - Threaded Here is a pic of the adapters to make it work with the Kiss Golem Gear, Inc. - Conversion kit for Inspiration threaded Golem BOV Now that I have a Meg I am looking for a way to use this same setup on the Meg. Any ideas how I might make this work? I may need to change the hoses on the Meg such that the end closest to the DSV is the same inside diameter as the Kiss hose. Currently the Meg hose is flared out to a bigger diameter so that it can slide over the Meg DSV. Does anyone have or know where I might obtain hoses that might fit? John Last edited by jkaterenchuk : 11th May 2008 at 12:02.
(Online)

12th May 2008, 00:44	#2 (permalink)
lof RebreatherWorld Sponsor Current Rebreather/s: Megalodon Prism Topaz Sport Kiss Classic Kiss MK 15.X Other CCR RB80 / Clone Other SCR Home Build Other Rebreather/s: Other CCR RB80 / Clone Other SCR Home Build Join Date: Jun 2005 Location: USA Posts: 452	Re: Golem Inspo BOV onto Meg Hoses That is what I did. I just found some hoses that fit both the Meg T-pieces and threaded Golem BOV. __________________ Jakub Golem Gear ShopKeeper www.golemgear.com
(Offline)

12th May 2008, 01:11	#3 (permalink)
jkaterenchuk . Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Other Rebreather/s: Join Date: May 2006 Location: Lititz, PA Posts: 559	Re: Golem Inspo BOV onto Meg Hoses Quote: (Originally Posted by lof) That is what I did. I just found some hoses that fit both the Meg T-pieces and threaded Golem BOV. Thanks, where might I find the same hoses? john
(Online)

12th May 2008, 07:47	#4 (permalink)
Lancer4545 Closed Circuit Divers Aus Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jun 2007 Location: Cairns QLD Australia Posts: 534	Re: Golem Inspo BOV onto Meg Hoses Quote: (Originally Posted by jkaterenchuk) Now that I have a Meg I am looking for a way to use this same setup on the Meg. Any ideas how I might make this work? Hey John, Does this mean you'll be bringing the new baby to Coron ? Lance __________________ You can run but you can't hide! ISC Appointed Megalodon Dealer for East Australia http://www.closedcircuitdivers.com.au info@closedcircuitdivers.com.au
(Offline)

12th May 2008, 13:28	#5 (permalink)
jkaterenchuk . Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Other Rebreather/s: Join Date: May 2006 Location: Lititz, PA Posts: 559	Re: Golem Inspo BOV onto Meg Hoses Quote: (Originally Posted by Lancer4545) Hey John, Does this mean you'll be bringing the new baby to Coron ? Lance Thats the plan at the moment. John
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode