Anyone got an APEKS ATX50 or ATX100 handy please?

Mdemon · 4th May 2007, 22:03

Bit more to it than that - you need a set of calipers too...

Divematics are trying to make me an adapter to fit an ATX50 to my BOV. Unfortunately the sizing seems different over here - I'm hoping someone could let me know what the correct size now is please. The bit in question is the stub that you tie-wrap the rubber mouthpiece to. The oval stub will be fitted into the larger oval of the adapter and held there with a grub screw.

For reference, here are the dimensions of my (UK) Apeks ATX50; (external) max width = 21.05mm max length = 37.87mm. It's at least three years old now, maybe four. Obviously, +- 1mm is fine! A ruler is probably good enough to measure the outside width and length.

If this is the same as everyone elses then they can make me an adapter with a slot big enough to accept the reg.

I know it's a long shot, but could anyone help please?

TIA!

Dave Crampton · 4th May 2007, 23:07

Are you sure they haven't got their hands on an Xtx?

Mdemon · 5th May 2007, 13:11

Quote: (Originally Posted by Dave Crampton)

Are you sure they haven't got their hands on an Xtx?

Dunno. Got an XTX to measure? The adapter plate I was sent (which the ATX50 doesn't fit into) measures: (internal) max width = 19.12mm, max length = 37.27mm.

An XTX would be good.

Mdemon · 5th May 2007, 16:56

My ATX40 is 21mm x 38mm so I guess the range is the same.

For Colin; the inner diameter is 12.8mm x 31.8mm. Roughly. HTH.

Dave Crampton · 5th May 2007, 19:27

Sorry John, I don't have much OC gear now

4th May 2007, 22:03	#1 (permalink)
Mdemon SiegeEngine II Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Inspiration Classic Home Build Join Date: Feb 2007 Location: SWUK Posts: 1,927	Anyone got an APEKS ATX50 or ATX100 handy please? Bit more to it than that - you need a set of calipers too... Divematics are trying to make me an adapter to fit an ATX50 to my BOV. Unfortunately the sizing seems different over here - I'm hoping someone could let me know what the correct size now is please. The bit in question is the stub that you tie-wrap the rubber mouthpiece to. The oval stub will be fitted into the larger oval of the adapter and held there with a grub screw. For reference, here are the dimensions of my (UK) Apeks ATX50; (external) max width = 21.05mm max length = 37.87mm. It's at least three years old now, maybe four. Obviously, +- 1mm is fine! A ruler is probably good enough to measure the outside width and length. If this is the same as everyone elses then they can make me an adapter with a slot big enough to accept the reg. I know it's a long shot, but could anyone help please? TIA!
(Offline)

4th May 2007, 23:07	#2 (permalink)
Dave Crampton CK #051 Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Bury St Edmunds, UK Posts: 278	Re: Anyone got an APEKS ATX50 or ATX100 handy please? Are you sure they haven't got their hands on an Xtx?
(Offline)

5th May 2007, 13:11	#3 (permalink)
Mdemon SiegeEngine II Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Inspiration Classic Home Build Join Date: Feb 2007 Location: SWUK Posts: 1,927	Re: Anyone got an APEKS ATX50 or ATX100 handy please? Quote: (Originally Posted by Dave Crampton) Are you sure they haven't got their hands on an Xtx? Dunno. Got an XTX to measure? The adapter plate I was sent (which the ATX50 doesn't fit into) measures: (internal) max width = 19.12mm, max length = 37.27mm. An XTX would be good.
(Offline)

5th May 2007, 16:56	#4 (permalink)
Mdemon SiegeEngine II Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Inspiration Classic Home Build Join Date: Feb 2007 Location: SWUK Posts: 1,927	Re: Anyone got an APEKS ATX50 or ATX100 handy please? My ATX40 is 21mm x 38mm so I guess the range is the same. For Colin; the inner diameter is 12.8mm x 31.8mm. Roughly. HTH.
(Offline)

5th May 2007, 19:27	#5 (permalink)
Dave Crampton CK #051 Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Bury St Edmunds, UK Posts: 278	Re: Anyone got an APEKS ATX50 or ATX100 handy please? Sorry John, I don't have much OC gear now
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode