PDA

View Full Version : Hollis



  1. Anybody heard anything about DiveCan upgrade?
  2. Hello Explorer Divers
  3. New Hollis Prism 2 BMCL & More at DEMA 2014
  4. NEW GUY QUESTION - HELMETS & R/Bs
  5. Stands
  6. Prism2 CE approved
  7. what bottles are suggested
  8. triming bailout bottles
  9. Prism 2 stand
  10. Hollis Prism 2 bucket strong enough
  11. Hollis Explorer Divers on Face book
  12. Dsix stand for the Prism 2
  13. Dive training with Mathew Addison in Cozumel report
  14. Hollis Explorer Scrubber Packing
  15. Prism 2 EXtendable stand - new version available
  16. Hollis p 2
  17. Prism2 User Service Guide
  18. P2 + sms75
  19. Use hollis explorer as oxygen rebreather
  20. Prism II Second Shearwater
  21. P2 BMCL release?
  22. Cells for Prism 2?
  23. Loop diametre on the new Hollis MOD1 FFM (Prism)
  24. P2 calibration kit
  25. So how is it going for Explorer divers?
  26. P2 Stand Review
  27. Oetiker Hose Clamps
  28. Does anyone add weight in their Counterlungs
  29. P2 divers, what do you store your scrubber basket in?
  30. New or second hand Hollis Explorer?
  31. P2 Electronics Upgrade?
  32. Oeticker Pliers?
  33. P2 cylinder fit question
  34. 2x PRISM 2 tips needed
  35. Prizm 2 HUD problem
  36. Hollis Discontinuing Rebreathers?
  37. Prism trim weighting ?
  38. Pre-dive asambly check list
  39. Europe Service
  40. New sensor reading 14.7 mV in air. Would you dive it?
  41. D-rings or UCL for bailouts?
  42. Prism 2 BMCL?
  43. Prism 2: Cracked Scrubber Cannister Lid
  44. Dmea 2017
  45. Sub Gravity BMCL's