Meg configuration

This is the basic streamlined hose routing for the Meg that I use and teach.

  1. 10. Left side back

  2. 11. Rear with both cylinders attached I hope you find this informative. For courses or diving in Playa Del Carmen, Mexico see our website at...

  3. 7. Cable for 2nd handset or X-link down first 2 also for light cable run up through bungees on wing and down same Velcro as handset

  4. 8. Keep the inflator hose in first velcro and control loops with bungee. I also like to keep the inflator at same level as manual add for less...

  5. 9. Right side with cylinders attached

  6. 4. Route the SPG down the harness note shorter length and flex hose

  7. 5. O2 and ADV hoses route inside of the loop held in place with bungee

  8. 6. Full frontal view, Primary handset clipped across to added D ring on right CL

  9. 1. Diverite Rec Wing

  10. 2. Hoses routed over back plate

  11. 3. Harness with wing and buttplate attached
Showing photos 1 to 11 of 11