Rebreather World - View Single Post

Gilles · 2nd March 2007, 09:11

British Bullnose = 5/8" BSP with RH thread. This is what is used here in neighboring Malaysia, and I believe the British standard that is attempted to be applied.

If worse comes to worse, you can purchase a welding torch reg set at a local hardware store in Ambon and take apart the fittings on the oxy reg to use on your O2 supply. I think all you'll need is an adapter from 1/4 NPTF to whatever fitting you have on your filling whip.

2nd March 2007, 09:11	#6 (permalink)
Gilles Worship the feminine Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Sep 2005 Location: Den Haag (Netherlands) Posts: 762	Re: Anyone recognize this fitting? British Bullnose = 5/8" BSP with RH thread. This is what is used here in neighboring Malaysia, and I believe the British standard that is attempted to be applied. If worse comes to worse, you can purchase a welding torch reg set at a local hardware store in Ambon and take apart the fittings on the oxy reg to use on your O2 supply. I think all you'll need is an adapter from 1/4 NPTF to whatever fitting you have on your filling whip. __________________ Gilles http://www.dirrebreather.com Last edited by Gilles : 2nd March 2007 at 13:20.
(Offline)