Rebreather World - View Single Post

Almvsalutay · 19th January 2007, 15:21

Hi Allan
Check the jack pin connector on the pin that plugs into the cell give it a clean.
Also what is the Millivolt readings for the cell on the secondary display?
Even if the millivolts is below 8mv the cell health would give a reading.
I reckon its a poor connection.

Regards, Al

19th January 2007, 15:21	#2 (permalink)
Almvsalutay New Member Current Rebreather/s: Other CCR Other Rebreather/s: MK 15.X Other CCR Join Date: Mar 2005 Location: Poole Dorset Posts: 13	Re: Calibration! Hi Allan Check the jack pin connector on the pin that plugs into the cell give it a clean. Also what is the Millivolt readings for the cell on the secondary display? Even if the millivolts is below 8mv the cell health would give a reading. I reckon its a poor connection. Regards, Al __________________ Al Wright Skype: salutay
(Offline)