Rebreather World - View Single Post

decoweenie · 1st November 2006, 08:39

Quote: (Originally Posted by Mark Chase)

Custom manifold with dill feed and 02 feed to a gas switching block and back up to the solenoid...

If that is what you want to do, here is an easier way...

Use THIS device to connect by diluent and O2 to the solenoid lid inlet. A simple slide will switch one gas for another.

1st November 2006, 08:39	#54 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,488	Re: Hard off switch on the Hammer Head Quote: (Originally Posted by Mark Chase) Custom manifold with dill feed and 02 feed to a gas switching block and back up to the solenoid... If that is what you want to do, here is an easier way... Use THIS device to connect by diluent and O2 to the solenoid lid inlet. A simple slide will switch one gas for another. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)