Rebreather World - View Single Post

Skipbreather · 19th October 2006, 02:21

Quote: (Originally Posted by Explorer)

Humm, could one insert the mini Meg's scubber into the normal canister with an additional spacer for those short dives?

Very straightforward to do. Just put your two scrubbers side by side and accurately measure the precise difference in height. Get yourself a stub of 6” PVC pipe & turn down the outside diameter in a lathe to just under 6.5 “ (Meg’s inside diameter). Square up both ends and cut it off at your measured height difference. Put it in the can before the stock spacer and you’re good to go.

Just keep in mind the factory recommended max burn time is now as specified for the Mini Meg.

19th October 2006, 02:21	#2 (permalink)
Skipbreather Reads the fine print Current Rebreather/s: Megalodon Home Build Other Rebreather/s: Not Bought Yet MK 15.X Home Build Join Date: Mar 2005 Location: Chicago, Illinois, USA Posts: 580	Re: Mini scubber in normal canister????? Quote: (Originally Posted by Explorer) Humm, could one insert the mini Meg's scubber into the normal canister with an additional spacer for those short dives? Very straightforward to do. Just put your two scrubbers side by side and accurately measure the precise difference in height. Get yourself a stub of 6” PVC pipe & turn down the outside diameter in a lathe to just under 6.5 “ (Meg’s inside diameter). Square up both ends and cut it off at your measured height difference. Put it in the can before the stock spacer and you’re good to go. Just keep in mind the factory recommended max burn time is now as specified for the Mini Meg.
(Offline)