Rebreather World - View Single Post

Pierre Farrugia · 5th June 2005, 17:06

Hello,

On sat. before dive my VR3 started a dive on land showing 20min dive time but depth 0. Then just switched off! Jumped in and worked perfectly even depth was ok, then at end of dive while surfacing with set point 0.7, at 3m or less, noticed that the setpoint was changing and at a point was showing 0.4!! I don't use an external cell and unit was not bumped or dropped!!! Anyone had same problem? Today I dove it again and worked just fine!

Regards

Pierre

5th June 2005, 17:06	#1 (permalink)
Pierre Farrugia Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2005 Location: Malta Posts: 636	VR3 acting strangly Hello, On sat. before dive my VR3 started a dive on land showing 20min dive time but depth 0. Then just switched off! Jumped in and worked perfectly even depth was ok, then at end of dive while surfacing with set point 0.7, at 3m or less, noticed that the setpoint was changing and at a point was showing 0.4!! I don't use an external cell and unit was not bumped or dropped!!! Anyone had same problem? Today I dove it again and worked just fine! Regards Pierre __________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" www.atlam.org www.divemed.com
(Offline)