Rebreather World - View Single Post

johnv · 26th September 2006, 19:35

I strongly suspect is is dirt on the sealing surface. It's easy to take apart the bypass and you can the clean the seat and blow through the hoze.

These seem to be very sensitive to small grains of sand or similar.

John

26th September 2006, 19:35	#5 (permalink)
johnv RBW Member Current Rebreather/s: Other CCR Home Build Other Rebreather/s: Other CCR Home Build Join Date: Dec 2005 Location: UK Posts: 163	Re: Draeger Ray Bypass Freeflowing I strongly suspect is is dirt on the sealing surface. It's easy to take apart the bypass and you can the clean the seat and blow through the hoze. These seem to be very sensitive to small grains of sand or similar. John
(Offline)