View Single Post
Old 21st September 2006, 18:47   #7 (permalink)
Faceless
alone lurking in wrecks
 
Faceless's Avatar

Current Rebreather/s:
Not Bought Yet

Other Rebreather/s:
Not Bought Yet
 
Join Date: May 2006
Location: France, Montpellier
Posts: 92
Faceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really niceFaceless is just really nice
Re: Minor questions on how to run rebreather simulation scripts

Here are first bugs:
I don't know maybe i'm doing smth wrong ? ...

When I ran dive simulation partially in manual mode, partially in deco, PPO2 some how has drop down to 0.40 !
Here is my dive profile:



And this is PPO2 graph


PPO2 setpoing was set to 1.3

Here is the link to the generated dive profile
http://orrb.faceless.ru/55m_deco_ac/55m_deco_ac.mat

Steps to reproduce:
1. Set gas mix to air ( 21%O2, 0% He) set descent speed to 30, and pause conditions to 55 meters. Start simulation.
2. When sim will go to pause after reaching 55 meters depth, set desc speed to 0, switch to accelerated mode, change pause conditions to wait for 20 minutes and press Run.
3. When system will calculate nesessary amount of steps and go to Pause again, change dive input to "deco" and hit Run button again.

Last edited by Faceless : 21st September 2006 at 18:52.
(Offline)
 
Reply With Quote