Rebreather World - View Single Post - Minor questions on how to run rebreather simulation scripts

Faceless · 17th September 2006, 13:00

Here are first two questions "as for the beginning", they're mostly general.
1. Does setting failure modes has any impact on predive checks ?
I'v noticed that for example despite me setting "oxygen solenoid stuck open" mode or "diluent cylinder empty" failure mode options i'm always able to pass predive check.
2. Does the similation has any ability to plan dive like VPlanner or VR3? So far i've worked only with "profile mode" where dive simulation is being performed against existing dive profiles. How a new profile can be created in manual mode. Smth like me entering desired depth & time, next computer at predive stage checking validity of entered value and offering some profile to work with.

Once again i'm terribly sorry for probably silly questions, my experience with Rebreather so far is limited to several introductory dives, so i'm familiar with all the nesessary check & bailout procedures, but on a very limited basic. For my deco dives on open cycle i'm using VPlanner with "Best mix" calculator.

17th September 2006, 13:00	#4 (permalink)
Faceless alone lurking in wrecks Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: May 2006 Location: France, Montpellier Posts: 92	Re: Minor questions on how to run rebreather simulation scripts Here are first two questions "as for the beginning", they're mostly general. 1. Does setting failure modes has any impact on predive checks ? I'v noticed that for example despite me setting "oxygen solenoid stuck open" mode or "diluent cylinder empty" failure mode options i'm always able to pass predive check. 2. Does the similation has any ability to plan dive like VPlanner or VR3? So far i've worked only with "profile mode" where dive simulation is being performed against existing dive profiles. How a new profile can be created in manual mode. Smth like me entering desired depth & time, next computer at predive stage checking validity of entered value and offering some profile to work with. Once again i'm terribly sorry for probably silly questions, my experience with Rebreather so far is limited to several introductory dives, so i'm familiar with all the nesessary check & bailout procedures, but on a very limited basic. For my deco dives on open cycle i'm using VPlanner with "Best mix" calculator. Last edited by Faceless : 17th September 2006 at 17:45.
(Offline)